Difference between revisions of "Development boards power supply"
From ArmadeusWiki
(→DevLight V1) |
(add AFP27) |
||
| Line 1: | Line 1: | ||
[[Image:DevFull_Power_Supply_Connector.jpg]] | [[Image:DevFull_Power_Supply_Connector.jpg]] | ||
| − | + | {{Warning|For all development boards: '''+ is in the middle of the connector, - on the side'''}} | |
| − | ==DevLight V1== | + | ==APF9328== |
| + | === DevLight V1=== | ||
* Use +5Vdc to +9Vdc input voltage | * Use +5Vdc to +9Vdc input voltage | ||
| − | ==DevLight V2== | + | ===DevLight V2=== |
* Use +5Vdc to +7Vdc input voltage | * Use +5Vdc to +7Vdc input voltage | ||
| − | ==DevFull== | + | ===DevFull=== |
| + | * Use +7Vdc to +24Vdc input voltage | ||
| + | |||
| + | ==APF27== | ||
| + | ===DevLight & DevFull=== | ||
* Use +7Vdc to +24Vdc input voltage | * Use +7Vdc to +24Vdc input voltage | ||
Revision as of 17:31, 25 February 2009
 |
Warning: For all development boards: + is in the middle of the connector, - on the side |
APF9328
DevLight V1
- Use +5Vdc to +9Vdc input voltage
DevLight V2
- Use +5Vdc to +7Vdc input voltage
DevFull
- Use +7Vdc to +24Vdc input voltage
APF27
DevLight & DevFull
- Use +7Vdc to +24Vdc input voltage
