Difference between revisions of "APF27 PPS"
From ArmadeusWiki
(New page: ==Description== This is the Armadeus System's standard development board/baseboard for the APF27 module. The following options are only populated on the "Full" version (APF27DevFull):...) |
(→Description) |
||
| Line 1: | Line 1: | ||
==Description== | ==Description== | ||
| − | This is the Armadeus System's | + | This is the Armadeus System's development board/baseboard for the PPS module. |
| − | + | This board is use to implement and securize network applications. | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
==Errata== | ==Errata== | ||
Revision as of 15:01, 30 November 2010
Contents
Description
This is the Armadeus System's development board/baseboard for the PPS module. This board is use to implement and securize network applications.
Errata
- The APF27Dev DVI/HDMI output may not work correctly: due to a hardware issue on the Powerdown pin of the AD9889, the component may not work as expected (display not detected or going to sleep after some minutes).
- Solution: remove R43 and connect pin PD/A0 (23) to GND. You can place a short circuit over C76.
- Consequence: the AD9889 can no more be placed in low power mode by hardware.
Resources
Feature list
Audio
VideoVideo OutVideo In |
User InputWired communicationStorage |
RealtimeOther
FPGA |
