Difference between revisions of "Development boards power supply"
From ArmadeusWiki
(→APF51Dev) |
(→APF51Dev) |
||
| Line 20: | Line 20: | ||
==APF51== | ==APF51== | ||
===APF51Dev=== | ===APF51Dev=== | ||
| − | * Use + | + | * Use +8V DC to +28V DC input voltage (standard DC jack input) |
* or LI-Po/Li-ion batterie (3.7 or 3.6V) input (J11). Some peripherals will not be powered (please see APF51Dev [http://www.armadeus.com/_downloads/apf51_Dev/documentation/ Datasheet] for details) | * or LI-Po/Li-ion batterie (3.7 or 3.6V) input (J11). Some peripherals will not be powered (please see APF51Dev [http://www.armadeus.com/_downloads/apf51_Dev/documentation/ Datasheet] for details) | ||
* or USB OTG connector (J3). In this case some peripherals will not be powered (please see APF51Dev [http://www.armadeus.com/_downloads/apf51_Dev/documentation/ Datasheet] for details) | * or USB OTG connector (J3). In this case some peripherals will not be powered (please see APF51Dev [http://www.armadeus.com/_downloads/apf51_Dev/documentation/ Datasheet] for details) | ||
Revision as of 08:41, 12 October 2011
 |
Warning: For all development boards: + is in the middle of the connector, - on the side. Use a regulated power supply capable of providing at least 500mA at minimum required voltage. |
Contents
APF9328
DevLight V1
- Use +5V DC to +9V DC input voltage
DevLight V2
- Use +5V DC to +7V DC input voltage
DevFull
- Use +7V DC to +24V DC input voltage
APF27
DevLight & DevFull
- Use +6V DC to +16V DC input voltage
APF51
APF51Dev
- Use +8V DC to +28V DC input voltage (standard DC jack input)
- or LI-Po/Li-ion batterie (3.7 or 3.6V) input (J11). Some peripherals will not be powered (please see APF51Dev Datasheet for details)
- or USB OTG connector (J3). In this case some peripherals will not be powered (please see APF51Dev Datasheet for details)
