Difference between revisions of "APF28"

Revision as of 16:06, 17 January 2012

Description

The APF28 is a simple and low cost Single Board Computer targeted for small GUI, communication and control process.

Here is a list of the main features:

• Processor: Freescale i.MX51 (ARM9 @ 454MHz)
• RAM: DDR2 400. 64 to 512MB. 16 bits data bus. Default capacity is 128MB.
• Flash: NAND. 256MB to 4GB, 8 bits data bus. Default capacity is 256MB
• Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link)
• USB: High speed USB OTG (OnTheGo) with onboard Physical
• USB: 1 High speed Hosts with integrated PHY
• Touchscreen controler (4/5 wires)
• Low speed ADCs (up to 7)
• High speed ADC
• RTC and Watchdog
• Battery charger (Li-On/Li-Po)
• Supplies: high end DC/DC converters and LDOs on board. Only one external supply required (5V, batterie or 3.3V).
• Mechanical dimensions: ~43x25mm

All the i.MX28 peripherals (LCD, 2xSDIO, 2xSPI, 6xSerial, I2C, CSI, 3xUSB, keypad, PWM, etc...) and the FPGA signals can be accessed through two high density Hirose connectors.

Resources

• Datasheet and schema

Feature list

• APF51_Linux_kernel_status