Difference between revisions of "APF28Dev"
From ArmadeusWiki
(→Wired communication) |
(→Selecting LCD) |
||
| Line 66: | Line 66: | ||
<pre class="apf"> | <pre class="apf"> | ||
| − | BIOS> setenv | + | BIOS> setenv console ${console} lcd_panel=LW700 |
## Switch baudrate to 115200 bps andpress ENTER ... | ## Switch baudrate to 115200 bps andpress ENTER ... | ||
BIOS> saveenv | BIOS> saveenv | ||
</pre> | </pre> | ||
Revision as of 16:40, 16 April 2012
Contents
Description
This is the Armadeus System's standard development board/baseboard for the APF28 module.
Errata
Resources
Feature list
Audio
Video Out |
User InputWired communicationStorage |
RealtimeOther |
Temporary fixes
Backlight
- Force backlight to ON state:
echo 124 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio124/direction echo 1 > /sys/class/gpio/gpio124/value
Selecting LCD
Two LCD are available for the apf28Dev kit. By default, TM035KBH02 is selected in Linux. To use the LW700, under U-Boot do :
BIOS> setenv console ${console} lcd_panel=LW700
## Switch baudrate to 115200 bps andpress ENTER ...
BIOS> saveenv
