Difference between revisions of "Chimei LW700"
From ArmadeusWiki
(→Resources) |
SebastienSz (Talk | contribs) m (→Description) |
||
| Line 1: | Line 1: | ||
=Description= | =Description= | ||
| + | {{Note| '''The Chimei LW700AT has been replaced by the ST0700_adapt board.'''}} | ||
| − | This adapter board allows you to connect a [http://www.armadeus.com/english/products-peripherals- | + | This adapter board allows you to connect a [http://www.armadeus.com/english/products-peripherals-st0700_adapt.html LCD] to your DevFull.<br> |
The following table summarizes the possibilities to connect the LQW700AT and the Touchscreen to your development board: | The following table summarizes the possibilities to connect the LQW700AT and the Touchscreen to your development board: | ||
Revision as of 09:06, 21 February 2014
Description
 |
Note: The Chimei LW700AT has been replaced by the ST0700_adapt board. |
This adapter board allows you to connect a LCD to your DevFull.
The following table summarizes the possibilities to connect the LQW700AT and the Touchscreen to your development board:
| APF27Dev | |
|---|---|
| TFT usage | flat cable (1) connected between J10 of the APF27Dev and X5 of the LCD_Adapt |
| Touchscreen usage | All touchscreen signal are provided by main flat cable. |
(1) Flat cable
A simple flat cable (PC like) can be used to connect the LW700_Adapt to the APF27Dev. If you do not have one, a ready to use cable can be found here.
Align the pins 1 (square via) on both boards together.
Do not use long cables.
