Difference between revisions of "APF6Dev"
From ArmadeusWiki
(→Tips) |
(→Other) |
||
| Line 69: | Line 69: | ||
===Other=== | ===Other=== | ||
| − | * [[PWM]]: PWM3 output is on J2 pin 26 <br>(2.8V output) | + | * [[PWM]]: PWM3 output is on J2 pin 26 <br>(2.8V output), but also used by LCD backlight ! |
* [[GPIOlib]] | * [[GPIOlib]] | ||
* [[JTAG]] | * [[JTAG]] | ||
Revision as of 17:17, 15 April 2016
Contents
Description
This is the Armadeus System's standard development board/baseboard for the APF6 module.
The following options are available:
Errata
- As the board is also used for APF6_SP module (APF6+FPGA), you might experience some miscellaneous FPGA LED blinking (beside "FPGA_SW" button) when no FPGA is present.
Resources
Feature list
Audio
Video OutVideo In |
User InputWired communicationStorage |
Realtime clockWireless communicationFPGA connectionsOther |
Tips
- Using 7" 800x480 LCD with 3.10/3.14 legacy kernel:
BIOS> setenv extrabootargs video=mxcfb0:dev=lcd,800x480@60,if=RGB666,bpp=32
root@apf6 ~ # fbset > /etc/fb.modes
- Activating HDMI console with USB keyboard in U-Boot (since armadeus-6.0):
BIOS> usb start BIOS> setenv stdout serial,vga BIOS> setenv stderr serial,vga BIOS> setenv stdin serial,usbkbd
keyboard map is english one and it seems not possible to change it (U-Boot 2014.07) ?
- to activate login in Framebuffer console, please uncomment /etc/inittab line 35 this way:
# Set up a getty on LCD tty1::respawn:/sbin/getty 38400 tty1
