Difference between revisions of "OPOS6ULDev"
From ArmadeusWiki
(→Tips) |
(→Feature list) |
||
| Line 47: | Line 47: | ||
* [[MultiMediaCard]] | * [[MultiMediaCard]] | ||
|| | || | ||
| − | |||
| − | |||
===Wireless communication=== | ===Wireless communication=== | ||
Revision as of 10:58, 22 September 2016
Contents
Description
This is the Armadeus System's standard development board/baseboard for the OPOS6UL module.
Errata
Resources
Feature list
AudioVideo OutVideo In |
User InputWired communicationStorage |
Wireless communicationOther |
Connectors
- RPi compatible connector:
| Function | Function | Function | RPi name | Function | JX Pin | JX Pin | Function | RPi name | Function | Function | Function |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3.3V | 1 | 2 | 5V | ||||||||
| SDA1 | I2C data | 3 | 4 | 5V | |||||||
| SCL1 | I2C clock | 5 | 6 | GND | |||||||
| GPIO7 | GPIO | 7 | 8 | UART Tx | TxD | ||||||
| GND | 9 | 10 | UART Rx | RxD | |||||||
| GPIO0 | GPIO | 11 | 12 | GPIO | |||||||
| GPIO2 | GPIO | 13 | 14 | GND | |||||||
| GPIO3 | GPIO | 15 | 16 | GPIO | |||||||
| 3,3V | 17 | 18 | GPIO | ||||||||
| SPI MOSI | 19 | 20 | GND | ||||||||
| SPI MISO | 21 | 22 | GPIO | ||||||||
| SPI CLK | 23 | 24 | |||||||||
| GND | 25 | 26 | |||||||||
| I2C Data | 27 | 28 | I2C clock | ||||||||
| GPIO | 29 | 30 | GND | ||||||||
| GPIO | 31 | 32 | GPIO | ||||||||
| GPIO | 33 | 34 | GND | ||||||||
| GPIO | 35 | 36 | GPIO | ||||||||
| GPIO | 37 | 38 | GPIO | ||||||||
| GND | 39 | 40 | GPIO |
Tips
Bootstrap
- Put Boot0 jumper to go in Bootstrap mode
Linux
- to activate login in Framebuffer console, please uncomment /etc/inittab line 35 this way:
# Set up a getty on LCD tty1::respawn:/sbin/getty 38400 tty1
