Difference between revisions of "NTP"
From ArmadeusWiki
(Debian install) |
|||
| Line 8: | Line 8: | ||
==Time synchronisation from GPS== | ==Time synchronisation from GPS== | ||
| + | {| class="wikitable" | ||
| + | |- | ||
| + | ! Buildroot !! Debian | ||
| + | |- | ||
| + | | | ||
* You will need the "real" NTP daemon, not the Busybox one. | * You will need the "real" NTP daemon, not the Busybox one. | ||
| + | || | ||
| + | <pre class="apf"> | ||
| + | root@opos6ul:~# apt-get install ntp | ||
| + | </pre> | ||
| + | |} | ||
| + | |||
* Edit config file (''/etc/ntp.conf''): | * Edit config file (''/etc/ntp.conf''): | ||
<pre class="apf"> | <pre class="apf"> | ||
Revision as of 15:06, 29 March 2017
From https://en.wikipedia.org/wiki/Network_Time_Protocol, "Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched, variable-latency data networks." Practically, it allows you to have current time/date on your APF even if your don't have an RTC (you will need an Internet connection or a GPS ;-)).
Get current Time from Internet
# ntpd -nqp 217.147.208.1
Time synchronisation from GPS
| Buildroot | Debian |
|---|---|
|
root@opos6ul:~# apt-get install ntp |
- Edit config file (/etc/ntp.conf):
# Allow only time queries, at a limited rate, sending KoD when in excess. # Allow all local queries (IPv4, IPv6) restrict default nomodify nopeer noquery limited kod restrict 127.0.0.1 restrict [::1] server 127.127.20.0 mode 17 minpoll 4 maxpoll 4 prefer fudge 127.127.20.0 flag3 1 flag2 0 flag1 1 time1 0.0
- 127.127.20.0 means: "use /dev/gps0 and parse it as NMEA to get time" (See [1]).
- mode 17 is for 9600 bauds GPS providing GPRMC frames
- To create /dev/gpsX (here GPS is connected to UART2):
# ln -sf /dev/ttymxc1 /dev/gps0
- To launch ntpd:
# /usr/sbin/ntpd -g -c /etc/ntp.conf
