Difference between revisions of "Minicom"
From ArmadeusWiki
(→Installation) |
|||
| Line 8: | Line 8: | ||
or use your system's graphical package manager. | or use your system's graphical package manager. | ||
| − | = | + | To avoid using ''sudo'' or ''root'', add your user (here ''mylogin'') in ''dialout'' group: |
| − | + | <pre class="host"> | |
| + | $ sudo adduser mylogin dialout | ||
| + | </pre> | ||
| + | then close and re-open your graphical session, to make group changes taken into account. | ||
==Configuration== | ==Configuration== | ||
Revision as of 14:46, 16 April 2018
Minicom is a serial line terminal emulator that allows you to take control of your board through the RS232 line. With it you can have access to the U-Boot/Linux console of your APF without needing to connect a keyboard/screen to the board. (For more informations on remote console)
Contents
Installation
On *Ubuntu / Debian
$ sudo apt-get install minicom
or use your system's graphical package manager.
To avoid using sudo or root, add your user (here mylogin) in dialout group:
$ sudo adduser mylogin dialout
then close and re-open your graphical session, to make group changes taken into account.
Configuration
$ minicom -s
- Choose serial port name, parameters (8N1) and no hardware handshake
- Save config as default
Usage
- To launch it (-o to not send modem AT init sequence):
$ minicom -o
- To switch from terminal mode to command mode:
CTRL + a then z
- To quit:
Switch in command mode q
Send file
When you are connected on apf running Linux:
- Open minicom menu
C-A + s
- Choose zmodem
- Select your file to download with space-key
- launch transfert with enter
Usefull tips
- TBDL
