Difference between revisions of "Shell remote access through Internet"

Revision as of 14:58, 2 August 2019

Sometimes we want to have our embedded system plug somewhere with Internet access and connect to it from a remote place without having to configure servers/box/NAT/proxy/"what you want tricky". This page will explain how to do this with Shell In a Box and serveo.net.

Shell In A Box

• First we will install this small tool on our system. It is a small web server that allow client to connect to our system with Internet browser, making them think they are using a SSH connection. For more informations: https://code.google.com/archive/p/shellinabox/

• shellinabox tool is packaged in Buildroot, so all we hav to do is to select it, rebuild our rootfs and reflash it on our system:

$ make menuconfig

...
Target packages  --->
    ...
    Networking applications  --->
        ...
        [*] shellinabox
        ...

$ make
$ cp buildroot/output/images/xxx-rootfs.xxx /tftpboot

BIOS> run update_rootfs

• then reboot your system and login as usual.

• to quickly test shellinabox:

# ip addr show eth0 | grep inet    (to get IP @ of your board)

# shellinaboxd -c /tmp -u root -t -b

Then from a browser on your host you can access https://192.168.1.5:4200

serveo.net

• Previous instructions gave us a way to access our system from the local network. We will now see how to deal with the Internet.
• serveo.net is a free service (for personnal use) that allow you to create SSH tunnels with WWW access without installing anything on your client (it should at least have a SSH client installed, like any Armadeus SOM).
• First check you system has Internet access:

# ping google.com

• If not, this tutorial will end up now for you ;-).
• Then ask serveo.net to create a tunnel with a permanent www @ with following command:

# ssh -R -L localhost:4200 toto@serveo.net

• Testing: now from a PC outside your local network, you can open a browser and point it to : https://toto.serveo.net

• Tada !