Difference between revisions of "MTF-T035"

Revision as of 21:25, 29 March 2007

TFT Specifications

The MTF-T035 320x240 3.5" color TFT display from Microtips is the default TFT display supported. Two pin compatible versions are available. One with touchscreen (analog outputs) and one without. The MTF-T035 is provided with a 4 white led backlight.

The specification can be found here: [1]

Some photos are although available here: Board Pictures

Adapter Board

This kind of LCD requires an adapter board. The small board generates the required bias voltages, integrates a white led driver and provides a standard 2.54 connector interface. It has to be noted that a simple 3.3V supply must be used.

The schematics can be found here: [2]

The assembly drawings can be found here: [3]

Note that the pin 1 of the connectors are although written in the top layer copper.

Connections with the DevLight

Just connect signals with same names together. Use only short wires !

The DevLight schematics and specification may be usefull: [4]

Once done verify the connections by means of your multimeter. Do not forget to check the 3.3V supply polarity on the LCD_adapt board before to power up the system !

LCD orders

Please add your name and the LCD type you want to the list below. On order will be placed in two/three weeks. The production of the LCD Adapter board has been launched. Expected delivery date: Week 17/18

• Rachid Koucha: 1x LCD_Touchscreen
• ThomasB: 1x LCD (with or without touchscreen)??
• Sonzerro: 1x LCD_Touchscreen
• Olivier Coutanceau: 1x LCD_Touchscreen
• Arnaud Coffinet : 1x LCD_Touchscreen
• Henri Geist : 1x LCD_Touchscreen
• JulienB: 1x LCD_Touchscreen
• JeanMichelN: 1x LCD_Touchscreen