Difference between revisions of "FPGA and led"
From ArmadeusWiki
| Line 7: | Line 7: | ||
The main FPGA page [[http://www.armadeus.com/wiki/index.php?title=FPGA]] of the armadeus wiki. | The main FPGA page [[http://www.armadeus.com/wiki/index.php?title=FPGA]] of the armadeus wiki. | ||
| − | This document [http://www.cs.uml.edu/~fredm/courses/91.548-spr06/files/qst.pdf] gives a lot of usefull | + | This document [http://www.cs.uml.edu/~fredm/courses/91.548-spr06/files/qst.pdf] gives a lot of usefull information on how to use ISE Webpack. |
Page 9 of this document shows the devlight pinout matrix: [http://www.armadeus.com/downloads/apf9328DevLight/documentation/dataSheet_APF9328_DevLight.pdf] | Page 9 of this document shows the devlight pinout matrix: [http://www.armadeus.com/downloads/apf9328DevLight/documentation/dataSheet_APF9328_DevLight.pdf] | ||
Revision as of 20:46, 14 April 2007
This project is intented for people who are new to VHDL.
We will connect a switch and a led to the FPGA and use some VHDL code to toggle the led state each time the switch is pressed.
Some usefull informations:
The main FPGA page [[1]] of the armadeus wiki.
This document [2] gives a lot of usefull information on how to use ISE Webpack.
Page 9 of this document shows the devlight pinout matrix: [3]
Pages 28 and 29 of the APF datasheet shows the mapping of the devlight pinouts with the FPGA pinouts :[4]
Schematic
Anatomy of the circuit
The led_top.vhd is a VHDL file where the components of the circuit are instantiated and connected between them.
The functional diagram of the circuit is :*
Benoît Canet / benoit on #armadeus
