Difference between revisions of "MTF-T035"

From ArmadeusWiki
Jump to: navigation, search
(LCD orders)
(LCD orders)
Line 62: Line 62:
 
*JeanMichelN: 1x LCD_Touchscreen '''->livré'''
 
*JeanMichelN: 1x LCD_Touchscreen '''->livré'''
 
*FabienG: 1x LCD_Touchscreen '''->livré'''
 
*FabienG: 1x LCD_Touchscreen '''->livré'''
*Nicolas Aguirre: 1x LCD_Touchscreen '''->en attente de confirmation'''
+
*Nicolas Aguirre: 1x LCD_Touchscreen '''->Libre'''
 
*Cédric Pineau: 1x LCD_Touchscreen '''->confirmé
 
*Cédric Pineau: 1x LCD_Touchscreen '''->confirmé
 
*KarlB: 1x LCD_touchscreen '''->livré'''
 
*KarlB: 1x LCD_touchscreen '''->livré'''

Revision as of 16:08, 5 September 2007

TFT Specifications

The MTF-T035 320x240 3.5" color TFT display from Microtips is the default TFT display supported. Two pin compatible versions of this LCD are available: one with touchscreen (analog outputs) and one without. The MTF-T035 is provided with a 4 white led backlight.

The specification can be found here: [1]

Some photos are although available here: Board Pictures

Adapter Board

MTF 035 Adapt.jpg

This kind of LCD requires an adapter board. The small board generates the required bias voltages, integrates a white led driver and provides a standard 2.54 connector interface. It has to be noted that only a 3.3V supply is required.

The specification can be found here: [2]

The schematics can be found here: [3]

The assembly drawings can be found here: [4]

Note that the pin 1 of the connectors are although written in the top layer copper.

Connecting the LCD to the adapter board

Open connector, plug & align LCD Flex pin 1 and PCB pin 1
Close connector

Connections with the DevLight

Just connect signals with same names together. Use the shortest wires you can !

The DevLight schematics and specification may be usefull: [5]

Once done verify the connections by means of your multimeter. Do not forget to check the 3.3V supply polarity on the LCD_adapt board before to power up the system !

Troubleshooting

If your LCD shows too much White then set the potar on the LCD_Adapt to the minimum value.

LCD Adapt potar.jpg

LCD orders

Please add your name and the LCD type you want to the list below. The LCD_Adapter boards have been received and are working so far so good. 15 TFT pcs arrived !!!

  • Rachid Koucha: 1x LCD_Touchscreen ->en attente de confirmation
  • ThomasB: 1x LCD_touchscreen ->confirmé
  • Sonzerro: 1x LCD_Touchscreen ->livré
  • Olivier Coutanceau: 1x LCD_Touchscreen ->livré
  • Arnaud Coffinet : 1x LCD_Touchscreen ->livré
  • Henri Geist : 1x LCD_Touchscreen ->livré
  • JulienB: 1x LCD_Touchscreen ->confirmé
  • JeanMichelN: 1x LCD_Touchscreen ->livré
  • FabienG: 1x LCD_Touchscreen ->livré
  • Nicolas Aguirre: 1x LCD_Touchscreen ->Libre
  • Cédric Pineau: 1x LCD_Touchscreen ->confirmé
  • KarlB: 1x LCD_touchscreen ->livré
  • ChristopheF: 1x LCD_touchscreen ->en attente de confirmation
  • Reserved : 1x LCD_touchscreen
  • Reference board : 1x LCD_touchscreen


Second list for next order

  • MichelT : 1x LCD_touchscreen
  • Stephane Falck : 1x LCD_touchscreen
  • Julien Nicolas : 1x LCD_touchscreen
  • Mickael Toumi : 1x LCD_touchscreen (attente adhésion)
  • Denis Brion : 1x LCD_touchscreen

Linux drivers

Screenshots

SNES emulator running on the LCD
SNES emulator running on the LCD