Difference between revisions of "TSC2102"
From ArmadeusWiki
(→Signals) |
(→Adapter board) |
||
| Line 40: | Line 40: | ||
==Adapter board== | ==Adapter board== | ||
| − | For those who would like to test this component before the DevFull release, take a look at this link: http://www.farnell.fr and type '1426186' as part to search. <br> | + | For those who would like to test this component before the DevFull release, take a look at this link: http://www.farnell.fr and type '[http://fr.farnell.com/jsp/Supports+CI,+cartes+prototypes+et+protection+antistatique/Cartes+prototypes/ROTH+ELEKTRONIK/RE933-07/displayProduct.jsp?sku=1426186&_requestid=343396 1426186]' as part to search. <br> |
This is a small pcb converting a tssop32 to two rows of 2.54mm holes... | This is a small pcb converting a tssop32 to two rows of 2.54mm holes... | ||
Revision as of 22:30, 15 November 2007
Informations about the hardware interface between the i.MXL and the TSC2102. This chip will be available on the DevFull board but anyone should be able to add it to it's DevLight.
Contents
Introduction
This chip is a "SMART" 4-Wire Touch Screen Controller with Stereo DAC with HP Amplifier.
Interface with i.MXL
Touchscreen
Configuration and data exchange is done through the SPI bus n°2 (SPI2).
The SPI 2 port is shared with the LCD interface of the iMX.
Audio
Configuration is done through SPI2 bus and audio data exchange through SSIA
Signals
| i.MXL/DevLight | TSC2102 | Functionnality |
|---|---|---|
| SPI2_SCLK/REV | SCLK | SPI clock |
| SPI2_TXD/SPL_SPR | MOSI | SPI MasterOut SlaveIn |
| SPI2_RXD_1/PS | MISO | SPI MasterIn SlaveOut |
| PortB 17/SSI1_TXDAT | SSn | SPI Chip select |
| SPI2_SS/PortD 8/CLS | PINT/DAVn | Interrupt |
| Reset (on Reset switch) | RESETn | Global reset signal |
Remark:
- i.MXL/DevLight SPI Chip Select signals are not used by Linux SPI infrastructure; it needs multiple chip select (one for each chip connected on the bus), and so GPIOs are used for that purpose.
- Chip interrupt is on Port D because Port B has already some and interrupt are shared on the same port.
Drivers
Adapter board
For those who would like to test this component before the DevFull release, take a look at this link: http://www.farnell.fr and type '1426186' as part to search.
This is a small pcb converting a tssop32 to two rows of 2.54mm holes...
