Difference between revisions of "Communicate"
From ArmadeusWiki
(→Forewords) |
m (→Connection Setup) |
||
| Line 8: | Line 8: | ||
==Connection Setup== | ==Connection Setup== | ||
| − | A Terminal emulator (for RS232 link) and a TFTP server (for | + | A Terminal emulator (for RS232 link) and a TFTP server (for Ethernet link) have to be configured, depending on your Host operating system: |
===Linux=== | ===Linux=== | ||
Revision as of 22:53, 8 December 2007
How-To connect your Armadeus board to your development Host.
Forewords
The default connection uses a simple RS232 link (Null-Modem cable).
If you want to tranfer data with the outside world, in a faster way, the Ethernet link is here.
At this stage, you should have something like that:
Connection Setup
A Terminal emulator (for RS232 link) and a TFTP server (for Ethernet link) have to be configured, depending on your Host operating system:
Linux
Connection with U-Boot on Linux
Window$
Connection with U-Boot on Window$
U-Boot communication
- Verify that your RS232 cable is correctly connected
- The bootstrap jumper must be removed
- Start the RS232 terminal on the Host side
- Reset the board
- U-Boot must start
Here is a screenshot of what you will see on your Terminal emulator during the Linux boot.
