Difference between revisions of "Telnet"
m (→Links) |
m (→Installation) |
||
| Line 4: | Line 4: | ||
==Installation== | ==Installation== | ||
| − | Telnet client and server are installed by default on the standard Armadeus rootfs. (Included in Busybox). | + | Telnet client and server are installed by default on the standard Armadeus rootfs. (Included in Busybox).<br> |
| − | + | As it's not a good idea to log in as root through Telnet, create a user that you will use when connecting: | |
| − | + | # adduser guest | |
| + | Changing password for guest | ||
| + | New password: | ||
| + | Retype password: | ||
| + | Password for guest changed by root | ||
==Usage== | ==Usage== | ||
Revision as of 12:27, 6 December 2008
From Wikipedia:
"Telnet (Telecommunication network) is a network protocol used on the Internet or local area network (LAN) connections. It was developed in 1969 beginning with RFC 15 and standardized as IETF STD 8, one of the first Internet standards. Typically, telnet provides access to a command-line interface on a remote machine.
The term telnet also refers to software which implements the client part of the protocol."
Installation
Telnet client and server are installed by default on the standard Armadeus rootfs. (Included in Busybox).
As it's not a good idea to log in as root through Telnet, create a user that you will use when connecting:
# adduser guest Changing password for guest New password: Retype password: Password for guest changed by root
Usage
Telnet server (telnetd) is launched by inetd when someone is trying to access port 23. This behaviour can be configured in /etc/inetd.conf:
# cat /etc/inetd.conf 23 stream tcp nowait root /usr/sbin/telnetd telnetd -l /bin/login
If so you just have to launch inetd at the start of your system.
