Difference between revisions of "Python development"
m (→pyserial) |
m (→Links) |
||
| Line 73: | Line 73: | ||
{{LanguageBar|Python_development|Développement python|Python}} | {{LanguageBar|Python_development|Développement python|Python}} | ||
| − | [[Category: | + | [[Category:Python]] |
[[Category:Programming language]] | [[Category:Programming language]] | ||
| + | [[Category:Software]] | ||
Revision as of 19:53, 8 February 2009
On this page you will learn how to create your first Python script for your Armadeus board. 
Contents
Installation
- Python interpreter and libraries are not installed in the default APF9328 rootfs. Currently it increases the rootfs size by 6 MBytes and so, without cleanup, it won't fit in the old APF9328 boards with 8 MBytes FLASH size. So for the moment, if you have an 8MB FLASH, you can only use it from a NFS or a MMC/SD rootfs.
Python version installed by Buildroot is 2.4.
If your are a Python expert you can still delete some files in $ROOTFS/usr/lib/python2.4/... and tell us what isn't mandatory and uses a lot of space for nothing.
- Launch Buildroot's menuconfig:
armadeus$ make menuconfig
- In
and in
choose
- then save your configuration and build your system:
armadeus$ make
- copy generated rootfs to your NFS directory or on your MMC/SD: Booting from NFS or Booting from MMC/SD.
Source code
- First take your favorite editor/IDE and create the following script:
import sys
print "APF says: Hello World ! ;-)"
sys.exit(0)
- Save it as hello.py
Compilation
Not needed. Transforming python script in executables hasn't been tested yet.
Running
- Copy your hello.py script on your NFS export directory or on your MMC/SD
- then on your APF console, launch it:
# python hello.py APF says: Hello World ! ;-) #
Now it's up to you ! ;-) But keep in mind that Python is extremely powerful and libraries rich, so if you don't pay attention to memory usage of your scripts, you can easily reach the APF9328 RAM size limit: 16 MBytes.
Advanced usages
Disabling modules
Defaults python modules can be enabled/disabled by Buildroot menuconfig
Installing modules
Default python package on buildroot is minimal, for certain usage, it necessary to install more modules. Here a list of module tested on apf9328 :
pyserial
This module is used to communicate through serial port (rs232). The package is really simple to install. Just download the module here [1] and unzip it on card (or on nfs filesystem). Once uncompressed just type :
# python setup.py install
Under the pyserial directory. Once installed, this directory is no longer needed.
Links
| Other languages: | |
|---|---|
|
| |
