Difference between revisions of "DVI / HDMI"

Revision as of 15:17, 19 June 2009

Page under construction... Informations on this page are not guaranteed !!

How to use the HDMI/DVI output of the APF27DevFull development boards.

Driver installation

 $ make linux26-menuconfig

Device Drivers--->
    Multimedia devices ---> 
        <*> Video For Linux
        [ ] Enable Video For Linux API 1
        < > DVB for Linux
            *** Multimedia drivers ***
        [ ] Load and attach frontend ...
        [ ] Customize analog and hybrid ...
        [*] Video capture adapters --->
            [ ] Autoselect pertinent encoders/decoders ...
                    Encoders/decoders and other helper chips  --->
                        <M> Analog Devices AD9889 digital video encoders (NEW)   
            [ ] V4L USB devices
        [ ] Radio adapters

 $ make 

Update the apf27 board with the new linux kernel and rootfs.

Usage

• load the module:

modprobe ad9889

Quick test

Connect a HDMI cable to the afp27devfull board and to your PC monitor. The Linux console must appear on the PC display.