Difference between revisions of "APF27"
From ArmadeusWiki
m |
m |
||
| Line 18: | Line 18: | ||
All the i.MX27 peripherals (LCD, 2xSDIO, 3xSPI, 6xSerial, I2C, CSI, 3xUSB, keypad, PWM, etc...) and the FPGA signals can be accessed through two high density [[Hirose connectors]] like on the [[APF9328]] board. | All the i.MX27 peripherals (LCD, 2xSDIO, 3xSPI, 6xSerial, I2C, CSI, 3xUSB, keypad, PWM, etc...) and the FPGA signals can be accessed through two high density [[Hirose connectors]] like on the [[APF9328]] board. | ||
| + | [[APF27 FPGA-IMX interface description]] | ||
Link to the [http://www.armadeus.com/english/products-processor_boards-apf27.html product page] | Link to the [http://www.armadeus.com/english/products-processor_boards-apf27.html product page] | ||
Revision as of 09:21, 31 July 2009
The APF27 is the new main board developped by Armadeus Systems.
This product is a middle/high-end Single Board Computer targeted for low power applications and extended connectivity.
Here is a list of the main features:
- Processor: Freescale i.MX27 (ARM9 @ 400MHz)
- RAM: Mobile DDR. 64 to 256MB. 32 bits data bus. Default capacity will be either 64 or 128MB.
- Flash: Mobile NAND. 256MB, 16 bits data bus.
- Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link)
- USB: High speed USB OTG (OnTheGo) with onboard Physical (ready to use USB OTG link)
- RS232: onboard Physical (RS232 compatible interface)
- FPGA: Xilinx Spartan 3A (50 to 400k gates, 200k default)
- Supplies: high end DC/DC converters and LDOs on board. Only one external supply from 3.3 to 5V required.
- Low power sleep mode (<10mW)
- Mechanical dimensions: ~60x45mm
All the i.MX27 peripherals (LCD, 2xSDIO, 3xSPI, 6xSerial, I2C, CSI, 3xUSB, keypad, PWM, etc...) and the FPGA signals can be accessed through two high density Hirose connectors like on the APF9328 board.
APF27 FPGA-IMX interface description
Link to the product page
Link to the technical documentation
