Difference between revisions of "Chimei LW700"
From ArmadeusWiki
m |
|||
| Line 1: | Line 1: | ||
| − | This adaptor board allows you to connect a [http://www.armadeus.com/english/products-peripherals-lw700at_adapt.html | + | This adaptor board allows you to connect a [http://www.armadeus.com/english/products-peripherals-lw700at_adapt.html CHIMEI LW700AT LCD] to your DevFull.<br> |
The description, the datasheet and the schematics of this adaptor board [http://www.armadeus.com/english/products-peripherals-lw700at_adapt.html can be found here.] | The description, the datasheet and the schematics of this adaptor board [http://www.armadeus.com/english/products-peripherals-lw700at_adapt.html can be found here.] | ||
| Line 23: | Line 23: | ||
== LW700_adapt links == | == LW700_adapt links == | ||
| − | * [http://www.armadeus.com/_downloads/ | + | * [http://www.armadeus.com/_downloads/lw700at_adapt/ Documentation (Armadeus Web site)] |
==Links== | ==Links== | ||
Revision as of 20:18, 19 December 2009
This adaptor board allows you to connect a CHIMEI LW700AT LCD to your DevFull.
The description, the datasheet and the schematics of this adaptor board can be found here.
The following table summarizes the possibilities to connect the LQW700AT and the Touchscreen to your development board:
| APF27Dev | |
|---|---|
| TFT usage | flat cable (1) connected between J10 of the APF27Dev and X5 of the LCD_Adapt |
| Touchscreen usage | All touchscreen signal are provided by main flat cable. |
(1) Flat cable
A simple flat cable (PC like) can be used to connect the LW700_Adapt to the APF27Dev. If you do not have one, a ready to use cable can be found here.
Align the pins 1 (square via) on both boards together.
Do not use long cables.
