Difference between revisions of "Chimei LW700"
From ArmadeusWiki
m |
m (→Ressources) |
||
| Line 22: | Line 22: | ||
| − | = | + | = Resources = |
* product page: http://www.armadeus.com/english/products-peripherals-lw700at_adapt.html | * product page: http://www.armadeus.com/english/products-peripherals-lw700at_adapt.html | ||
* datasheet: http://www.armadeus.com/_downloads/lw700at_adapt/documentation/LW700AT9901.pdf | * datasheet: http://www.armadeus.com/_downloads/lw700at_adapt/documentation/LW700AT9901.pdf | ||
Revision as of 10:28, 15 August 2010
Description
This adapter board allows you to connect a CHIMEI LW700AT LCD to your DevFull.
The following table summarizes the possibilities to connect the LQW700AT and the Touchscreen to your development board:
| APF27Dev | |
|---|---|
| TFT usage | flat cable (1) connected between J10 of the APF27Dev and X5 of the LCD_Adapt |
| Touchscreen usage | All touchscreen signal are provided by main flat cable. |
(1) Flat cable
A simple flat cable (PC like) can be used to connect the LW700_Adapt to the APF27Dev. If you do not have one, a ready to use cable can be found here.
Align the pins 1 (square via) on both boards together.
Do not use long cables.
Resources
- product page: http://www.armadeus.com/english/products-peripherals-lw700at_adapt.html
- datasheet: http://www.armadeus.com/_downloads/lw700at_adapt/documentation/LW700AT9901.pdf
- [shematics: http://www.armadeus.com/_downloads/lw700at_adapt/hardware/LW700AT_adapt_v0B.pdf
