Difference between revisions of "APF51"
From ArmadeusWiki
(→Feature list) |
m (→Description) |
||
| Line 16: | Line 16: | ||
* Supplies: high end DC/DC converters and LDOs on board. Only one external supply of 5V required. | * Supplies: high end DC/DC converters and LDOs on board. Only one external supply of 5V required. | ||
* Low power sleep mode | * Low power sleep mode | ||
| − | * Mechanical dimensions: ~ | + | * Mechanical dimensions: ~55x55mm (TBD) |
All the i.MX51 peripherals (LCD, 2xSDIO, 2xSPI, 6xSerial, I2C, CSI, 3xUSB, keypad, PWM, etc...) and the FPGA signals can be accessed through two high density [[Hirose connectors]]. | All the i.MX51 peripherals (LCD, 2xSDIO, 2xSPI, 6xSerial, I2C, CSI, 3xUSB, keypad, PWM, etc...) and the FPGA signals can be accessed through two high density [[Hirose connectors]]. | ||
Revision as of 23:08, 15 August 2011
Contents
Description
The APF51 is a high-end Single Board Computer targeted for advanced GUI, intensive computation and extended connectivity.
Here is a list of the main features:
- Processor: Freescale i.MX51 (Cortex-A8 @ 800MHz)
- RAM: Mobile DDR 400. 64 to 512MB. 32 bits data bus. Default capacity will be 256MB.
- Flash: Mobile NAND. 512MB, 8 bits data bus.
- Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link)
- USB: High speed USB OTG (OnTheGo) with onboard Physical (ready to use USB OTG link)
- USB: 2 High speed Hosts with integrated PHY
- FPGA: Xilinx Spartan 6 (LX9 or LX16). Default: LX9
- Touchscreen controler (4/5 wires)
- Low speed ADCs (up to 4)
- RTC and Watchdog
- Battery charger (Li-On/Li-Po)
- Supplies: high end DC/DC converters and LDOs on board. Only one external supply of 5V required.
- Low power sleep mode
- Mechanical dimensions: ~55x55mm (TBD)
All the i.MX51 peripherals (LCD, 2xSDIO, 2xSPI, 6xSerial, I2C, CSI, 3xUSB, keypad, PWM, etc...) and the FPGA signals can be accessed through two high density Hirose connectors.
Resources
- TBD
Feature list
VideoVideo OutVideo In |
Wired communicationUser Input |
StorageOther
FPGA |
