APF28

Description

The APF28 is a simple and low cost Single Board Computer targeted for small GUI, communication and control process.

Here is a list of the main features:

Processor: i.MX28x (ARM9 @ 454MHz)
RAM: DDR2 400. 64 to 512MB. 16 bits data bus. Default capacity is 128MB.
Flash: NAND. 256MB to 4GB, 8 bits data bus. Default capacity is 256MB
Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link)
USB: High speed USB OTG (OnTheGo) with onboard Physical
USB: 1 High speed Hosts with integrated PHY
Touchscreen controler (4/5 wires)
Low speed ADCs (up to 7)
High speed ADC
RTC and Watchdog
Battery charger (Li-On/Li-Po)
Supplies: high end DC/DC converters and LDOs on board. Only one external supply required (5V, batterie or 3.3V).
Mechanical dimensions: ~43x25mm

All the i.MX28 peripherals (LCD, SDIO, SPI, 6xSerial, I2C, 2xUSB, PWM, etc...) can be accessed through two high density Hirose connectors.