Chimei LW700

From ArmadeusWiki
Revision as of 18:06, 25 February 2014 by SebastienSz (Talk | contribs) (→‎Resources)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Description

Note Note: The Chimei LW700AT has been replaced by the ST0700_adapt board.


This adapter board allows you to connect a LCD to your DevFull.
The following table summarizes the possibilities to connect the LQW700AT and the Touchscreen to your development board:


APF27Dev
TFT usage flat cable (1) connected between J10 of the APF27Dev and X5 of the LCD_Adapt
Connection between APF27Dev and LW700_Adapt
Touchscreen usage All touchscreen signal are provided by main flat cable.


(1) Flat cable

A simple flat cable (PC like) can be used to connect the LW700_Adapt to the APF27Dev. If you do not have one, a ready to use cable can be found here.
Align the pins 1 (square via) on both boards together. Do not use long cables.

Features

Resources

Retrieved from "http://armadeus.org/wiki/index.php?title=Chimei_LW700&oldid=12579"