OPOS6UL SP Interfaces description
From ArmadeusWiki
Revision as of 07:50, 12 September 2018 by FabienM (Talk | contribs) (→FPGA configuration protocol)
Page under construction...
Informations on this page are not guaranteed !!
Contents
Introduction
This article describe the bus interface communication between the i.MX6UL(L) and the spartan6. In i.MX6UL(L) the bus used to make communication with the FPGA is named EIM for External Interface Module.
Simplified view
Default configuration on CSx
Clocks
Chip Select
Timings
FPGA Interrupt
FPGA configuration protocol
Links
- i.MX6UL(L) reference manual(PDF chapter 21 page 821)
