Linux 2.6.23 integration

From ArmadeusWiki
Revision as of 11:29, 17 November 2007 by Salocin68 (Talk | contribs) (Drivers test summary)

Jump to: navigation, search

Generic

  • in in drivers/i2c/busses/i2c-imx.h line 338, remove __init in void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info) otherwise kernel gives compilation warning:
WARNING: vmlinux.o(__ksymtab+0x3d8): Section mismatch: reference to .init.text:set_imx_fb_info (between '__ksymtab_set_imx_fb_info' and '__ksymtab_imx_get_usb_clk')
  • in arch/arm/mach-imx/apf9328.c line 28, config.h doesn't exist anymore

Serial

  • Serial registers Macros (like UFCR()) have been moved from imx-regs.h -> imx serial driver C file. So in apf9328.c we should remove these lines:
    // Serial
   UFCR(IMX_UART1_BASE) = 0xa81;
   UFCR(IMX_UART2_BASE) = 0xa81;

I2C

  • in drivers/i2c/busses/i2c-imx.c, SA_INTERRUPT is now obsolete and should be replaced by IRQF_DISABLED in request_irq() (line 575)
  • in drivers/i2c/busses/i2c-imx.h line 63, replace #define I2C_IMX_DEFAULT_CLKDIV 0x0f with #define I2C_IMX_DEFAULT_CLKDIV 16 otherwise it's giving error in driver compilation
  • in drivers/i2c/busses/i2c-imx.h line 104, struct i2c_algorithm doesn't have slave_send nor slave_recv anymore

MTD

  • in drivers/mtd/maps/apf9328.c line 28, consistent_sync() should be replaced by flush_ioremap_region() otherwise kernel is crashing (+adding of #include <asm/cacheflush.h>)

RTC

  • in drivers/rtc/rtc-ds1374.c line 59 dev_dbg(&client->dev, "%s: raw read data... should be commented otherwise not compiling

Backlight

  • struct backlight_properties backlight_device have changed backlight_operations was introduced
  • backlight_device_register() prototype has changed...

PWM

  • remove warnings in driver
  • use IRQF_DISABLE

Patches to remove ??

  • 012-linux-2.6.23.1-apm9328.diff

Problems encountered

Drivers test summary

Device Compiling ?
Static / Module
Working ? Comments
ADC  ??? NT NT NA
Backlight OK NT NT NA
DAC OK NA OK NA
CH7024 OK NA OK NA
LCD OK NT OK message starting PID 235, tty
MMC/SD OK NT NT NA
PWM (sound+classic)  ??? NT NT NA
RTC OK OK OK NA
TSC2102  ??? NT NT NA
USB (gadget)  ??? NT NT NA
USB (host)  ??? NT NT NA