Xenomai:Blinking LEDs
This tutorial explain how to create a simple xenomai application. This application has to goal to doing blinking the led.
Application code
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <signal.h>
#include <sys/mman.h>
#include <native/task.h>
#include <native/timer.h>
#define TIMESLEEP 1000000000
#define LED "/dev/gpio/PD31"
RT_TASK blink_task;
int fd;
void blink(void *arg){
int iomask = 0x00;
rt_task_set_periodic(NULL, TM_NOW, TIMESLEEP);
while(1){
rt_task_wait_period(NULL);
write(fd,&iomask,sizeof(iomask));
iomask^=1;
}
}
void catch_signal() {}
int main(int argc, char **argv) {
signal(SIGTERM, catch_signal);
signal(SIGINT, catch_signal);
/* Avoids memory swapping for this program */
mlockall(MCL_CURRENT|MCL_FUTURE);
/* led device opening */
if ((fd = open(LED, O_WRONLY))<0) {
printf("Open error on %s\n",LED);
exit(0);
}
/* Task Creation */
rt_task_create(&blink_task, "blinkLed", 0, 99, 0);
rt_task_start(&blink_task, &blink, NULL);
getchar();
rt_task_delete(&blink_task);
close(fd);
return 0;
}
This source is so equivalent to a classical application with threads and nanosleep() function.
The only differences are on the task creation using API xenomai.
int rt_task_create(RT_TASK * task, const char * name, int stksize, int prio, int mode)
Create a new task with stksize size of stack, prio level of priority and mode type of creation.
int rt_task_start (RT_TASK *task, void(*entry)(void *cookie), void *cookie)
Launch the new task with entry function and cookie parameter.
int rt_task_set_periodic (RT_TASK *task, RTIME idate, RTIME period)
set for the task periodic, idate time for the first release, time on nanoseconds
int rt_task_wait_period (unsigned long *overruns_r)
To block the task during a period of TIMESLEEP ns.
Makefile
The second step is to create a Makefile with specific Xenomai includes.
###### CONFIGURATION ######
DEST_DIR=/tftpboot/local/bin
ARMADEUS_BASE_DIR=../
include $(ARMADEUS_BASE_DIR)/Makefile.in
XENO=$(ARMADEUS_ROOTFS_DIR)/usr/xenomai
CC= arm-linux-gcc
LD= arm-linux-ld
CXX= arm-linux-g++
AS= arm-linux-as
NM= arm-linux-nm
AR= arm-linux-ar
SIZE= arm-linux-size
OBJCOPY= arm-linux-objcopy
EXEC=blink_led_xeno_userspace
SRC= $(wildcard *.c)
OBJ= $(SRC:.c=.o)
EXEC= $(APPLICATIONS)
CFLAGS=-g -W -Wall -I$(XENO)/include -I$(XENO)/include/native -I$(XENO)/include/rtdm -D_GNU_SOURCE -D_REENTRANT
LDFLAGS=-L$(XENO)/lib -Xlinker -rpath $(XENO)/lib -Xlinker $(XENO)/lib/libnative.a $(XENO)/lib/librtdm.a - lpthread -lnative -lrtdm
$(EXEC) : $(OBJ)
$(CC) -o $@ $^ $(LDFLAGS)
$(OBJ): $(SRC)
$(CC) $(CFLAGS) -o $@ -c $<
.PHONY: all
all: $(EXEC)
.PHONY: clean
clean:
rm -rf $(OBJ)
rm -rf $(EXEC)
rm -f *.c~ *.h~ Makefile~
.PHONY: install
install: $(EXEC)
mkdir $(DEST_DIR)/$(EXEC)
echo "$(EXEC):native:!./$(EXEC);popall:control_c" > /$(DEST_DIR)/$(EXEC)/.runinfo
cp $(EXEC) $(DEST_DIR)/$(EXEC)
.PHONY: mrproper
mrproper: clean
rm -rf $(DEST_DIR)/$(EXEC)
ARMADEUS_BASE_DIR has needed to be adapted to the correct path on where is installed the Armadeus buildroot.
DEST_DIR assume you used an nfs mount on tftpboot/local for /usr/local on the board.
Compilation, installation and run
For to have the application installed on your board, you need to type :
$ make install
Running
On your board, you must you placed on /usr/local/bin and type :
$ xeno-load blink_led_xeno_userspace
