DAC
From ArmadeusWiki
The Max5821L DAC can be controlled from the user space by using the setDAC function.
Installation
Not needed on latest versions (> Armadeus 3.0). Informations are kept here.
Usage
To set the DAC outputs to a given value, use the setDAC command:
# setDAC ##Usage: setDAC OUTPUT [VALUE] power down or set DAC output with value 0 - 1023 OUTPUT is A , B or AB (both) VALUE must be 0 - 1023 If no VALUE is given, then the output is powered down ##
 |
Warning: Do not forget to connect a voltage reference for the DAC !! |
