AsDevices

Page under construction... Informations on this page are not guaranteed !!

AsDevices is an ARMadeus specific library that simplify APF-board devices usage for developers. This library is written to be used with C, C++, Python, LUA, (Java?) languages. The core is written in C and other languages support is done with "wrappers".

Note: This library is under development, see the Development planning. to know which functionality is finished.

Install AsDevices on target

The library is included in Buildroot menu, to use it just select it in «make menuconfig» :

Package Selection for the target  --->
  *** Armadeus specific packages ***
  Armadeus specific tools/utilities  --->   
    [*] as_devices 

The base library is in C, to use it with C++ or Python, select the wrapper you need. (For Python you will need to select Python interpreter before as_devices wrapper).

Using library in C

All functions in AsDevices library are constructed on the same way. An as_*_open() function return a device structure or an int that represent the device used. All function take this device structure in first parameter, and a function as_*_close() close the device :

struct as_devicename_dev * as_devicename_open(<some parameters>);

as_devicename_do-something-with-device(struct as_devicename_dev *aDev, <some parameters>);

int as_devicename_close(struct as_devicename_dev *aDev);

For each library, full documentation can be found in C header in directory target/packages/as_devices/c.

I²C

as_i2c_* functions are used to access devices on i²c bus that doesn't have/need a Linux driver. If you want to access an i²c device, please find out if a driver is not already existing before using this method.

To open the bus, you have to know its number. On APF9328 and APF27 only two busses are present: number 0 and number 1. The open() function returns an int (file descriptor of the opened /dec/i2c-x), that have to be passed to all other as_i2c_* functions :

int as_i2c_open(unsigned int i2c_id);

SPI

Usage

To use as_spi_* function, the kernel module spidev is required. See SPI page to know how to configure it.

Once the special file /dev/spidevx.x is available in the kernel, as_spi library can be used including the header as_spi.h in your C source code :

#include "as_spi.h"

Full description of the API can be found in this header, available on sourceforge repository.

Example

The three mains useful functions used to communicate with a slave SPI device are :

int as_spi_open(const unsigned char *aSpidev_name);

To open the /dev/spidevx.x special spi file. This function return a file handler that will be used for all othes as_spi_* function.

void as_spi_close(int aFd);

As its name said, to close the device.

uint32_t as_spi_msg(int aFd, 
                    uint32_t aMsg, 
                    size_t aLen,
                    uint32_t aSpeed);

This function forge spi messages on MOSI pin and return MISO message.

GPIO

Usage

To use as_gpio_* functions, the kernel module gpio is required. See GPIO page to know how to configure it.

Once the special files /dev/gpio/* are available , as_gpio library can be use including header as_gpio.h in the C source code of application.

#include "as_gpio.h"

Example

Two examples are given, one for lightening led D14 and one to use blocking read on switch S1. This two example are made for APF27Dev daughter card.

• Lightening led

With as_gpio, each pin port can be openned separately. The as_gpio_open() function returns a pointer on gpio pin structure declared like this:

 int ret; /* for returning value */
 struct as_gpio_device *pf14;

On APF27Dev, D14 is plugged on port F pin 14, then to open it :

 pf14 = as_gpio_open('F', 14);

GPIO must be configured in ouput mode :

 ret = as_gpio_set_pin_direction(pf14, 1);

Then to switch LED value, just use as_gpio_set_pin_value() function:

 ret = as_gpio_set_pin_value(pf14, 1); /* led off */
 ...
 ret = as_gpio_set_pin_value(pf14, 0); /* led on */

Note that because off led wiring, led polarity is inverted (to light on set 0).

Once gpio pin usage is terminated, it must be closed :

 as_gpio_close(pf14);

• Pressing button

The button S1 can be used to test interrupt capability of gpio. The button is plugged on gpio port F pin 13. After declaring the as_gpio_device structure, the pin port can be opened :

 struct as_gpio_device *pf13;
 [...]

 pf13 = as_gpio_open('F', 13);

To stuff must be configured before using it as interruption source, direction and IRQ mode.

direction

 ret = as_gpio_set_pin_direction(pf13, 0); /* set switch as input */

IRQ mode There is four IRQ mode :

• GPIO_IRQ_MODE_NOINT : No interrupt, the processor will ignore event on this gpio.
• GPIO_IRQ_MODE_RISING : rising edge, the processor will generate an interruption on rising edge of gpio pin.
• GPIO_IRQ_MODE_FALLING: falling edge, the processor will generate an interruption on falling edge of gpio pin.
• GPIO_IRQ_MODE_BOTH : both, the processor will generate an interruption on both rising or falling edge of gpio.

 ret = as_gpio_set_irq_mode(pf13, GPIO_IRQ_MODE_FALLING); /* interrupt will be generated on pushed button */

To capture interruption, the blocking read function can be used with a timeout. If no interruption is raised after the timeout time, read function end with error value -10.

 ret = as_gpio_blocking_get_pin_value(pf13, 3, 0); /* wait for interruption for 3 seconds and 0 µs) */
 if(ret == -10)
     printf("Timeout\n");

PWM

Usage

To use as_pwm_* functions, the kernel module imx_pwm needs to be loaded. See PWM page to know how to configure it.

Once the special files /sys/class/pwm/pwmX/* are available , as_pwm_* functions can be use by including as_pwm.h header in the C source code of your application.

#include "as_pwm.h"

Example

#include "as_pwm.h"
...

int main(int argc, char *argv[])
{
    struct as_pwm_device *my_pwm;
...
    my_pwm = as_pwm_open(0);
    if (!my_pwm)
        printf("Can't init PWM !!\n");
    as_pwm_set_frequency(my_pwm, 150);
    as_pwm_set_duty(my_pwm, 500);
...
    as_pwm_set_state(my_pwm, 1);
}

Using library in Python

To use AsDevices in Python, select the python wrapper in menuconfig as follow :

Package Selection for the target  --->
  *** Armadeus specific packages ***
  Armadeus specific tools/utilities  --->   
    [*] as_devices 
    [*]   wrapper Python

then compile bsp and flash it on your board.

Once done, just import the module AsDevices to use all function available in library:

import AsDevice

Using library in C++

TODO

Using library in LUA

TODO

Development planning

AsDevices is not finished, following table indicates the remaining work:

Name	C functions	C++ wrapper	Python wrapper	Python class	LUA wrapper	description
i2c	Ok	NOK	NOK	NOK	compile	Drive I2C
spi	Ok, not fully tested	NOK	NOK	NOK	NOK	Drive SPI
gpio	Ok	NOK	Ok	Ok	NOK	Drive GPIO
max1027	Ok for SLOW mode	NOK	NOK	NOK	NOK	Drive Analog to Digital chip MAX1027
max5821	OK	NOK	NOK	NOK	NOK	Drive Digital to Analog chip MAX5821
93LCxx	OK	NOK	NOK	NOK	NOK	EEPROM memory on SPI.
PWM	OK	NOK	NOK	NOK	NOK