Development boards power supply

Warning: For all development boards: + is in the middle of the connector, - on the side. Use a regulated power supply capable of providing at least 500mA at minimum required voltage.

APF9328

DevLight V1

• Use +5V DC to +9V DC input voltage

DevLight V2

• Use +5V DC to +7V DC input voltage

DevFull

• Use +7V DC to +24V DC input voltage

APF27

DevLight & DevFull

• Use +6V DC to +16V DC input voltage

PPS

• Use +8V DC to +24V DC input voltage

APF51

APF51Dev

• Use +8V DC to +28V DC input voltage (standard DC jack input)
• or Li-Po/Li-ion batterie (3.7 or 3.6V) input (J11). Some peripherals will not be powered (please see APF51Dev Datasheet for details)
• or USB OTG connector (J3). In this case some peripherals will not be powered (please see APF51Dev Datasheet for details)

Links

Build your own battery pack for your APF