U-Boot-2011.12
From ArmadeusWiki
Revision as of 18:09, 5 March 2012 by Jorasse (Talk | contribs) (→Features/Status: add some test cases)
Activation
- Use "make menuconfig" to change the configuration for U-Boot 2011.12
TODO list
- MMC driver integration pending
Features/Status
| Status | Legend Color |
| Test passed | |
| Compilation or runtime test failed | |
| To be tested | |
| Optional/not activated by default | |
| NA/not supported |
| Feature | Status | Test case | |||
|---|---|---|---|---|---|
| boards | apf9328 | apf28 | apf27 | apf51 | |
| U-Boot power on | U-Boot 2011.12... I2C: ready DRAM: 16 MiB Flash: 8 MiB In: serial Out: serial Err: serial Net: dm9000 |
U-Boot 2011.12... | U-Boot 2011.12... | U-Boot 2011.12... | power on the board and check the boot log of the board |
| NOR/NAND flash | 8 MiB | MiB | MiB | MiB | startup sceen shall display: Flash: xx MiB |
| RAM | 16 MiB | 128MiB-1024MiB | MiB | MiB | startup sceen shall display: DRAM: 16 MiB |
| Ethernet driver | dm9000 | startup sceen shall display: Net: <DRIVER> | |||
| Ethernet MAC | dm9000 read 00000000: 1e00 00ac |
test the presence of the MAC address in EEPROM/fuses the command bdinfo should return a valid mac address | |||
| Default IP | the IP variables should be: ipaddr=192.168.0.10 netmask=255.255.255.0 serverip=192.168.0.2 gatewayip=192.168.0.1 | ||||
| DHCP | the command "DHCP" should be able to update IP environment variables according to your network and DHCP server | ||||
| Ping | set ipaddr & serverip according to your network. Test the connection to the server: ping ${serverip} should return the status "alive" | ||||
| Board reset | command "reset" shall reset the board | ||||
| Board upgrade scripts | use the hereafter scripts to update the software of the board: run update_all run flash_reset_env | ||||
| I2C | 38 76 7F | startup sceen shall display: I2C: ready the command "i2c probe" should return the list of devices on the i2c bus of the board | |||
| linux boot from flash' | the command "boot" should start linux and rootfs from flash the linux login should be "armadeus login: " | ||||
| PAR cleared | |||||
| Env compatibility change | |||||
| rootfs autosize | |||||
| Flash lock/unlock | postponed | postponed | |||
| FPGA control | not supported | ||||
| Firmware autoload | not supported | ||||
| NFS boot (rootfs) | |||||
| rootfs on SD/MMC | |||||
| JFFS2 | not supported | not supported | not supported | ||
| UBIfs | not supported | ||||
| imxfuse commands | NA | ||||
| TFTP | |||||
| NFS | |||||
| NETCONSOLE | |||||
| LCD | not supported | not supported | not supported | not supported | |
| SPI | not supported | not supported | not supported | not supported | |
| USB | not supported | not supported | not supported | not supported | |
