U-Boot-2012.04

Activation

• todo

Features/Status

Status	Legend Color
Test passed
Compilation or runtime test failed
To be tested
Optional/not activated by default
NA/not supported

Feature	Status				Test case
boards	apf9328	apf28	apf27	apf51
U-Boot power on	U-Boot 2011.12... I2C: ready DRAM: 16 MiB Flash: 8 MiB In: serial Out: serial Err: serial Net: dm9000	U-Boot 2011.12... Freescale i.MX28 family DRAM: 128 MiB NAND: 256 MiB MMC: MXS MMC: 0 In: serial Out: serial Err: serial Net: FEC0	U-Boot 2011.12.. CPU: Freescale i.MX27 at 399 MHz Armadeus APF27 DRAM: 64 MiB NAND: 256 MiB	U-Boot 2011.12... I2C: ready DRAM: 256-512 MiB NAND: 512 MiB In: serial Out: serial Err: serial Net: FEC	power on the board and check the boot log of the board
NOR/NAND flash	8 MiB	256MiB-2GiB	256MiB-2GiB	512MiB-4GiB	startup sceen shall display: Flash: xx MiB
RAM	16/32 MiB	128MiB-512MiB	64-256MiB	256-512MiB	startup sceen shall display: DRAM: 16 MiB
Ethernet driver	dm9000	FEC0	FEC	FEC	startup sceen shall display: Net: <DRIVER>
Ethernet MAC	dm9000 read 00000000: 1e00 00ac	bdinfo ... ethaddr = 00:1e:ac:...	imxfuse mac iMX mac_addr in fuse: 00:1e:ac:...	iim read fecmac FEC MAC address: 0x00:0x1e:0xac:...	test the presence of the MAC address in EEPROM/fuses the command bdinfo should return a valid mac address
Default IP					the default IP variables should be: ipaddr=192.168.0.10 netmask=255.255.255.0 serverip=192.168.0.2 gatewayip=192.168.0.1 use the "flash_reset_env" script to restore the default environment variables
DHCP					the command "DHCP" should be able to update IP environment variables according to your network and DHCP server
Ping					set ipaddr & serverip according to your network. Test the connection to the server: ping ${serverip} should return the status "alive"
Board reset					command "reset" shall reset the board
TFTP					the command "run download_uboot" should UBoot from the host PC into the target RAM
NFS					the command "nfs ${loadaddr} ${serverip}:/tftpboot/${board_name}-linux.bin" should download linux kernel from the host PC into the target RAM
Board upgrade scripts					use the hereafter scripts to update the software of the board: run update_all run flash_reset_env
I2C	38 76 7F	postponed	postponed	00 13 1A	startup sceen shall display: I2C: ready the command "i2c probe" should return the list of devices on the i2c bus of the board
linux boot from flash					the command "boot" should start linux and rootfs from flash the linux login should be "armadeus login: "
NFS boot (rootfs)					http://www.armadeus.com/wiki/index.php?title=Nfs#Boot_from_NFS the command "run nfsboot" should start linux using rootfs over a NFS shared drive on your host server ${serverip}
rootfs on SD/MMC					http://www.armadeus.com/wiki/index.php?title=MultiMediaCard#Booting_from_MMC.2FSD the command "run mmcboot" should start linux using a rootfs on your sd/mmc memory card
Flash lock/unlock		Not Applicable			For APF9328: protect on all erase ${env_addr} +${env_len} -> - Warning: 1 protected sectors will not be erased! protect off all erase ${env_addr} +${env_len} -> no warning - erase done other apf boards: nand lock; nand erase.part kernel Should not erase the kernel partion (error message, system hang or no message) boot linux to confirm nand integrity -> kernel should start
Env compatibility change					force a new environment version and check the warning on next reboot: setenv env_version 0 saveenv reset => *** Warning - Environment version change suggests: run flash_reset_env; reset
FPGA control	blinking_led_ apf9328_200k.bit	Not Applicable	blinking_led_ apf27_200k.bit	blinking_led_ apf51_lx9.bin	the command "fpga info 0" should indicate the presence of the spartan 3 Test FPGA download with the blinking_led bit file of your board: tftpboot ${loadaddr} blinking_led_apfxxxx_xxxk.bit fpga load 0 ${loadaddr} ${filesize} should make the LED blinking without error
Firmware autoload		Not Applicable			run flash_firmware setenv firmware_autoload 1 saveenv <power off>/<power on> the board LED should blink after a couple of seconds and UBoot should continue countdown to boot linux
imxfuse commands	Not Applicable	ocotp	imxfuse mac...	iim blow fecmac...	Use production tool to blow a MAC address
Detect RAM SIze	Not Applicable	128MiB	style="background:#ffff00;"	Board rev 1 with 512MiB	Using the default UBoot config test the given config is correct during boot
PAR cleared		Not Applicable		Not Applicable	run unlock_regs; boot once logged on linux try the command imxregs should display imx register value instead of any error like "Unhandled fault"
NETCONSOLE	not supported	not supported	not supported	not supported	Ethernet_console
LCD	not supported	not supported	not supported	not supported
SPI	not supported	not supported	not supported	not supported
USB	not supported	not supported	not supported	not supported