QemuMachineDevelopment
Contents
Introduction
Page under construction...
Informations on this page are not guaranteed !!
The aim of this project is to provide a fully functional and user-friendly way for developers and people interested in the Armadeus Project to test software like if it is running on a real board.
In a far-off time, the aim is to provide a small framework to build dynamic software tests and run them automatically (after a static analysis of code for instance in order to build a fully featured report).
Armadeus boards devices
| Device | Implemented ? |
|---|---|
| Network interface | not implemented |
| SD/MMC card reader | not implemented |
| GPIO | not implemented |
| Led's | not implemented |
| CAN bus | not implemented |
| I2C bus | not implemented |
| ADC/DAC | not implemented |
| SPI | not implemented |
| SSI | not implemented |
| UART | not implemented |
| USB (slave/host) | not implemented |
| LCD | not implemented |
| FPGA | not implemented |
| SRAM | not implemented |
| CSI | not implemented |
| Touchscreen | not implemented |
Source trees
Firstly, you have to install Subversion and Git packages
On Debian/Ubuntu (any version) :
[myhome] # apt-get install subversion git-core
On Gentoo
[myhome] # emerge dev-util/subversion dev-util/git
You can download the official QEMU svn tree here :
[my-repos] $ svn co svn://svn.savannah.nongnu.org/qemu/trunk
And my git repository where to find Armadeus DevFull board hardware emulation (Coming soon and depends on the interest people have in this project) :
[my-repos] $ git clone git://dedilabs.com/~jpeeters/qemu-jpeeters
Qemu mechanisms : Qemu separated in three parts
Qemu is a wide software in which it could be difficult to land up. So a little explanation have to be done.
The code translation and the emulation core system
Qemu integrates a dynamic code translation "machine" which translates target instructions in host ones on the fly. They all are already implemented in Qemu, so we have not them to remake. But this part of code is heavy compact and need knowledge in both host and target instructions set in order to understand it.
All the code of the TCG (Tiny Code Generator) is placed in the tcg directory of the source tree and contains implementations for the different targets.
Qemu is also composed of a common emulation system mainly contained in the vl.c file (in the root of the source tree). Every function which manage the emulation system are placed in this file.
= The Target specific code
It's not alredy clear to me where are placed the Qemu target specific code. So, at this time, it looks like there is mainly situated in the target-X directory (X have to be replaced by the target name, like "arm").
The hardware emulation layer
Despite of the hardware emulation layer is implemented both in the common emulation system and in an independent directory (named "hw"). It interacts with the emulation core through Qemu common functions each time. (see vl.c file)
