USB to Playstation joypad adapter

How-to use USB to Playstation joypad adapters on your APF boards.

Page under construction... Informations on this page are not guaranteed !!

This type of adapter allows you to control your applications/games with massively available joypads, through the USB Host interface (only available on DevFull & APF27)

Tested materials

Adapter Model	Chip	Status APF9328 / APF27		Driver	Comments
APM TwinUSB adapter	???				Digital pads & vibrators not tested
TBDL

Installation

 $ make linux26-menuconfig

 Device Drivers  ---> 
     [*] USB support  --->
         ...
 

 $ make linux26 && make

copy following drivers on your target or reflash your rootfs (for more infos, see this page)

drivers/usb/...

Usage

• be sure that your USB Host is running on your board: explanations are here
• plug your USB adapter (here a Prolific one)

TBDL

• Load the module:

# modprobe xxxx

• a new joystick interface will be created and recognized by applications supporting it.

Software examples

• If you want to know how to drive such beast from your applications, take a look at:
  • target/demos/input_test/ (SDL example)

Links

• TBDL

Notes: