APF28 Linux kernel status
From ArmadeusWiki
Revision as of 18:13, 15 February 2012 by JulienB (Talk | contribs) (→APF28Dev development baseboard)
The APF28 Linux distribution can be found here: latest stable installation tarball from SourceForge
Current version
Currently (armadeus-5.0-alpha) supported Linux versions are: mainline 3.1 and Freescale's 2.6.35.
- NT = Not Tested
- NA = Not Available / Not possible
APF28 (~ i.MX28 internal controllers)
Freescale's 2.6.35 Mainline 3.1
| Driver | Compiling ? Static / Module |
Working ? | Comments | Compiling ? Static / Module |
Working ? | Comments | ||
|---|---|---|---|---|---|---|---|---|
| NAND Flash | OK | NA | NT | NT | ||||
| SPI | OK | NA | NT | NT | ||||
| I2C | OK | NA | NT | NT | ||||
| MMC/SD/SDIO | OK | NA | ~OK | card detect KO | NT | |||
| DUART | OK | NA | OK | console | NT | |||
| AUART | OK | NA | NT | NT | ||||
| Ethernet | OK | NA | OK | NT | ||||
| USB OTG | OK | NA | NT | NT | ||||
| USB HOST1 | OK | NA | OK | NT | ||||
| PWM | OK | OK | NT | NT | ||||
| Backlight | OK | OK | KO | PWM3 | NT | |||
| RTC | NT | NT | NT | internal RTC | NT | |||
| Watchdog | NT | OK | NT | internal Watchdog | NT | |||
| LCD | OK | NA | OK | NT | ||||
| Touchscreen | OK | NT | KO | touch detect KO | NT | |||
| PXP | OK | NA | NT | NT | ||||
| Digital Audio | NA | OK | NT | NT | ||||
| Security/DCP | NT | NT | NT | NT | ||||
| LRADC | NT | NT | NT | NT | ||||
| HSADC | NT | NT | NT | NT | ||||
APF28Dev development baseboard
- NT = Not Tested
- NA = Not Available / Not possible
| Driver | Compiling ? Static / Module |
Working ? | Comments | |
|---|---|---|---|---|
| microSD | OK | NA | ~OK | |
| Ethernet | OK | NA | OK | |
| Debug UART | OK | NA | OK | |
| LW700 LCD | OK | NA | OK | Timings to adjust |
| MT035 LCD | OK | NA | OK | Timings to adjust |
| Touchscreen | NA | OK | KO | |
| USB Host High Speed | OK | NA | OK | |
| USB OTG | OK | NA | NT | |
| ADC | NA | OK | NT | |
| CAN Bus | NA | NT | NT | |
| User LED | OK | NT | OK | GPIOlib |
| User Button | OK | NT | ~OK | GPIOlib, edge selection not working |
| Power Button | OK | NT | KO | reset the board |
