APF28

Description

The APF28 is a simple and low cost Single Board Computer targeted for small GUI, communication and control process.

Here is a list of the main features:

Processor: i.MX28x (ARM9 @ 454MHz)
RAM: DDR2 400. 64 to 512MB. 16 bits data bus. Default capacity is 128MB.
Flash: NAND. 256MB to 4GB, 8 bits data bus. Default capacity is 256MB
Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link)
USB: High speed USB OTG (OnTheGo) with onboard Physical
USB: 1 High speed Hosts with integrated PHY
Touchscreen controler (4/5 wires)
Low speed ADCs (up to 7)
High speed ADC
RTC and Watchdog
Battery charger (Li-On/Li-Po)
Supplies: high end DC/DC converters and LDOs on board. Only one external supply required (5V, batterie or 3.3V).
Mechanical dimensions: ~43x25mm

All the i.MX28 peripherals (LCD, SDIO, SPI, 6xSerial, I2C, 2xUSB, PWM, etc...) can be accessed through two high density Hirose connectors.

The APF28 module can be plugged on the APF28Dev docking board or your own custom devt board.