U-Boot-2015.01
From ArmadeusWiki
Status
- U-Boot-2015.01: patch update and test ongoing..
Features/Status
| Status | Legend Color |
| Test passed | |
| Compilation or runtime test failed | |
| To be tested | |
| Optional/not activated by default | |
| NA/not supported |
| Feature | Status | Test case | ||||
|---|---|---|---|---|---|---|
| boards | apf9328 | apf28 | apf27 | apf51 | apf6 | |
| U-Boot power on | U-Boot 2015.01... I2C: ready DRAM: 16 MiB Flash: 8 MiB In: serial Out: serial Err: serial Net: dm9000 |
HTLLCLLC U-Boot 2015.01... DRAM: 128 MiB NAND: 256 MiB MMC: MXS MMC: 0 In: serial Out: serial Err: serial Net: FEC0 [PRIME] |
U-Boot 2015.01.. I2C: ready DRAM: 64 MiB NAND: 256 MiB MMC: MXC MCI: 0 In: serial Out: serial Err: serial Net: FEC |
U-Boot 2015.01... I2C: ready DRAM: 256-512 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial Out: serial Err: serial Net: FEC |
U-Boot 2015.01... |
power on the board and check the boot log of the board |
| NOR/NAND flash | 8 MiB | 256MiB-2GiB | 256MiB | 512MiB-4GiB | startup sceen shall display: Flash: xx MiB or NAND: xxxMiB | |
| RAM | 16/32 MiB | 128MiB-512MiB | 64-128MiB | 256-512MiB | startup sceen shall display: DRAM: xxx MiB | |
| Ethernet driver | dm9000 | FEC0 | FEC | FEC | startup sceen shall display: Net: <DRIVER> | |
| Ethernet MAC | dm9000 read 00000000: 1e00 00ac |
bdinfo ... ethaddr = 00:1e:ac:... |
bdinfo ... ethaddr = 00:1e:ac:... |
fuse read 1 9 6 ...Word 0x00000009: 00000000 0000001e 000000ac ... |
test the presence of the MAC address in EEPROM/fuses the command bdinfo should return a valid mac address | |
| Default IP | the default IP variables should be: ipaddr=192.168.0.10 netmask=255.255.255.0 serverip=192.168.0.2 gatewayip=192.168.0.1 use the "flash_reset_env" script to restore the default environment variables | |||||
| DHCP | the command "DHCP" should be able to update IP environment variables according to your network and DHCP server | |||||
| Ping | set ipaddr & serverip according to your network. Test the connection to the server: ping ${serverip} should return the status "alive" | |||||
| Board reset | command "reset" shall reset the board | |||||
| TFTP | the command "run download_uboot" should UBoot from the host PC into the target RAM | |||||
| NFS | the command "nfs ${loadaddr} ${serverip}:/tftpboot/${board_name}-linux.bin" should download linux kernel from the host PC into the target RAM | |||||
| Board upgrade scripts | use the hereafter scripts to update the software of the board: run update_all reset run flash_reset_env | |||||
| I2C | 38 76 7F | postponed | 38 68 | 1A 36 38 | startup sceen shall display: I2C: ready the command "i2c probe" should return the list of devices on the i2c bus of the board | |
| TFTP reliability | 5MB | Build a big rootfs (amount of mem minus 10MB) by adding a huge tar file in the target root dir - the command "run update_rootfs" should download the file and update the flash accordingly | ||||
| TFTP NAND option | Not Applicable | Build a big rootfs (bigger then RAM SIZE) by adding a huge tar file in the target root dir - the command "nand erase.part rootfs ; tftpboot ${rootfs_addr} ${board_name}-rootfs.ubi nand" should download the file and update the flash accordingly | ||||
| linux boot from flash | the command "boot" should start linux and rootfs from flash the linux login should be "armadeus login: " | |||||
| NFS boot (rootfs) | http://www.armadeus.com/wiki/index.php?title=Nfs#Boot_from_NFS the command "run nfsboot" should start linux using rootfs over a NFS shared drive on your host server ${serverip} | |||||
| rootfs on SD/MMC | http://www.armadeus.com/wiki/index.php?title=MultiMediaCard#Booting_from_MMC.2FSD the command "run mmcboot" should start linux using a rootfs on your sd/mmc memory card | |||||
| Flash lock/unlock | Not Applicable | For APF9328: protect on all erase nor0,1 -> - Warning: 1 protected sectors will not be erased! protect off all erase nor0,1 -> no warning - erase done other apf boards: nand lock; nand erase.part kernel Should not erase the kernel partion (error message, system hang or no message) boot linux | ||||
| Env compatibility change | force a new environment version and check the warning on next reboot: setenv flash_env_version 0 saveenv reset => *** Warning - Environment version change suggests: run flash_reset_env; reset | |||||
| FPGA control | blinking_led_ apf9328_200k.bit |
Not Applicable | blinking_led_ apf27_200k.bit |
blinking_led_ apf51_lx9.bin |
the command "fpga info 0" should indicate the presence of the spartan 3 Test FPGA download with the blinking_led bit file of your board: tftpboot ${loadaddr} blinking_led_apfxxxx_xxxk.bit fpga load 0 ${loadaddr} ${filesize} should make the LED blinking without error | |
| Firmware autoload | Not Applicable | run flash_firmware setenv firmware_autoload 1 saveenv <power off>/<power on> the board LED should blink after a couple of seconds and UBoot should continue countdown to boot linux | ||||
| imxfuse commands | Not Applicable | ocotp | imxfuse mac... | iim blow fecmac... | Use production tool to blow a MAC address | |
| Detect RAM SIze | not supported | 128MiB | Board rev. 1 with 128 MiB | Board rev. 1 with 512MiB | Using the default UBoot config test the given config is correct during boot | |
| PAR cleared | Not Applicable | Not Applicable | run unlock_regs; boot once logged on linux try the command imxregs CSR should display imx register value instead of any error like "Unhandled fault" | |||
| SD/MMC driver | not supported | The command "mmcinfo" should display the SD/MMC card information | ||||
| NETCONSOLE | not supported | not supported | not supported | not supported | Ethernet_console | |
| LCD | not supported | not supported | not supported | not supported | ||
| SPI | not supported | not supported | not supported | not supported | ||
| USB | not supported | not supported | not supported | usb start; usb reset; usb tree | ||
PPS Test/Status
| Feature | Status | Test case | |||
|---|---|---|---|---|---|
| boards | PPS (PPS27) | PPS51 | |||
| U-Boot power on | U-Boot 2014.04.. CPU: Freescale i.MX27 at 399 MHz Armadeus APF27 DRAM: 64 MiB NAND: 256 MiB |
U-Boot 2014.04... I2C: ready DRAM: 256-512 MiB NAND: 512 MiB In: serial Out: serial Err: serial Net: FEC |
power on the board and check the boot log of the board | ||
| NOR/NAND flash | 256 MiB | 512MiB | startup sceen shall display: Flash: xx MiB | ||
| RAM | 64-128MiB | 256-512MiB | startup sceen shall display: DRAM: xx MiB | ||
| Ethernet driver | FEC | FEC | startup sceen shall display: Net: <DRIVER> | ||
| DHCP | the command "DHCP" should be able to update IP environment variables according to your network and DHCP server | ||||
| Ping | set ipaddr & serverip according to your network. Test the connection to the server: ping ${serverip} should return the status "alive" | ||||
| Board reset | command "reset" shall reset the board | ||||
| TFTP | the command "run download_uboot" should UBoot from the host PC into the target RAM | ||||
| Board upgrade scripts | use the hereafter scripts to update the software of the board: run update_all run flash_reset_env | ||||
| TFTP reliability | Build a big rootfs (amount of mem minus 10MB) by adding a huge tar file in the target root dir - the command "run update_rootfs" should download the file and update the flash accordingly | ||||
| linux boot from flash | the command "boot" should start linux and rootfs from flash the linux login should be "armadeus login: " | ||||
| Wifi test | boot linux and initiate a wifi connection : load drivers and scan wifi network | ||||
