IIO kernel driver model
From ArmadeusWiki
Revision as of 09:20, 26 February 2015 by FabienM (Talk | contribs) (New page: Category:Kernel {{Under_Construction}} == Introduction == Industrial IO is a (relatively) new Linux driver model used to access ADC and DAC chip. This page aim to describe the inter...)
Page under construction...
Informations on this page are not guaranteed !!
Introduction
Industrial IO is a (relatively) new Linux driver model used to access ADC and DAC chip. This page aim to describe the interfaces and how to use it on APF*. The apf used for the experiments is APF6_SP.
iio
Kernel configuration
- Configure kernel with :
$ make linux-menuconfig
- then select :
Device Drivers --->
<*> Industrial I/O support --->
--- Industrial I/O support
[ ] Enable buffer support within IIO (NEW)
[ ] Enable triggered sampling support (NEW)
Accelerometers --->
Analog to digital converters --->
Amplifiers --->
Hid Sensor IIO Common ----
Digital to analog converters --->
Frequency Synthesizers DDS/PLL --->
Digital gyroscope sensors --->
Humidity sensors --->
Inertial measurement units --->
Light sensors --->
Magnetometer sensors --->
Inclinometer sensors ----
Pressure sensors --->
Lightning sensors --->
Temperature sensors --->
