MMC/SD
From ArmadeusWiki
Revision as of 12:30, 19 September 2006 by 217.128.254.186 (Talk)
How-To connect an MMC/SD to the APF9328
For instructions to use MMC on Linux, see MultiMediaCard page.
Adapter board
You need to connect the signals listed in the table below to the APF9328DevLight board. The WP and CD_SW signals are optional and must be connected to free IOs if used.
Top view:
| Adapter Pin | Desc | Adapter Pin | Desc |
| 1 | +3.3V | 2 | SD_DAT2 |
| 3 | SD_CMD | 4 | SD_DAT3 |
| 5 | SD_CLK | 6 | SD_DAT0 |
| 7 | WP | 8 | SD_DAT1 |
| 9 | CD_SW | 10 | GND |
Remarks:
- Pin 1 (rectangular pad)
- WP: write protect
- CD_SW: Card Detect switch
