Linux start screenshot

Screenshot showing the serial text console during boot:

U-Boot 1.1.3 (Jan  8 2006 - 16:00:26) apm9328 patch 2.2

U-Boot code: 0BF80000 -> 0BFA2264  BSS: -> 0BFA7014
RAM Configuration:
Bank #0: 08000000 32 MB
Flash: 16 MB
In:    serial
Out:   serial
Err:   serial
BIOS> boot
""##"" Booting image at 100a0000 ...
  Image Name:   Linux-2.6.12
  Image Type:   ARM Linux Kernel Image (uncompressed)
  Data Size:    1028824 Bytes = 1004.7 kB
  Load Address: 08008000
  Entry Point:  08008000
  Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux.................................................................... done, booting the kernel.
Linux version 2.6.12 (eric@supin) (gcc version 3.4.3) #2 Fri Jan 27 21:14:03 CET 2006
CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Machine: Synertronixx scb9328
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists
Kernel command line: console=ttySMX0,115200n8   mtdparts=scb9328_flash:256k(U-boot)ro,128k(U-boot_env),256k(firmware),1m(kernel),6m(root),-(fs) root=/dev/mtdblock4 rootfstype=jffs2  ip=192.168.000.2:192.168.000.1:192.168.000.1:255.255.255.0:apm9328dev::off
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 30208KB available (1884K code, 214K data, 96K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
i.MX Framebuffer driver
Console: switching to colour frame buffer device 30x40
apf9328_lcd_power: 1
Serial: IMX driver
ttySMX0 at MMIO 0xe0006000 (irq = 30) is a IMX
ttySMX1 at MMIO 0xe0007000 (irq = 24) is a IMX
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 1 RAM disks of 4096K size 1024 blocksize
dm9000 Ethernet Driver
eth0: dm9000 at edc3fffc,edc40000 IRQ 110 MAC: 00:0e:32:00:00:01
Probing scb9328_flash at physical address 0x10000000 (16-bit buswidth)
scb9328_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
6 cmdlinepart partitions found on MTD device scb9328_flash
Creating 6 MTD partitions on "scb9328_flash":
0x00000000-0x00040000 : "U-boot"
0x00040000-0x00060000 : "U-boot_env"
0x00060000-0x000a0000 : "firmware"
0x000a0000-0x001a0000 : "kernel"
0x001a0000-0x007a0000 : "root"
0x007a0000-0x01000000 : "fs"
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
NET: Registered protocol family 1
NET: Registered protocol family 17
eth0: link down
IP-Config: Complete:
     device=eth0, addr=192.168.000.2, mask=255.255.255.0, gw=192.168.100.1,
    host=apm9328dev, domain=, nis-domain=(none),
    bootserver=192.168.200.1, rootserver=192.168.200.1, rootpath=
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 96K
Starting portmap daemon: portmap.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Initializing random number generator... done.
Starting network...
Starting sshd: OK


Welcome to the Armadeus project.

armadeus login: root


""BusyBox"" v1.01 (2006.01.27-18:50+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

#