OPOS8MMDev

From ArmadeusWiki
Revision as of 17:32, 22 June 2022 by JulienB (Talk | contribs) (Connectors)

Jump to: navigation, search


Page under construction... Construction.png Informations on this page are not guaranteed !!

Description

This is the Armadeus System's standard development board/baseboard for the OPOS8MM module.

File:OPOS8MM Dev.png

Errata

Resources

Feature list

Audio

Video Out

Video In

User Input

Wired communication

Storage

Wireless communication

Other

Connectors

  • RPi compatible connector (NC: Not Connected, NA: Not available):
Linux GPIO or device i.MX8MM Mux config OPOS8MM Pin Name wiringPi N° RPi name Function JX Pin JX Pin Function RPi name wiringPi N° OPOS8MM Pin Name i.MX8MM Mux config Linux GPIO or device
- +3V3 3.3V 1 2 5V +5V -
/dev/i2c-3 I2C4_SDA SDA1 I2C data 3 4 5V +5V -
/dev/i2c-3 I2C4_SCL SCL1 I2C clock 5 6 GND GND -
pwm3 GPIO1_IO14_PWM3_OUT GPIO1_14 7 GPIO7 GPIO / AIN9 7 8 UART Tx TxD UART1_TX /dev/ttymxc?
GND GND 9 10 UART Rx RxD UART1_RX /dev/ttymxc?
gpio4 GPIO1_IO04_GPIO1_IO4 GPIO1_4 0 GPIO0 GPIO 11 12 GPIO / AIN8 GPIO1 GPIO1_5 gpio?
gpio1 GPIO1_IO01_GPIO1_IO1 GPIO1_1 GPIO2 GPIO 13 14 GND GND
gpio0 GPIO1_IO00_GPIO1_IO0 GPIO1_0 GPIO3 GPIO 15 16 GPIO GPIO4 4 UART1_RTS gpio?
GND 3,3V 17 18 GPIO GPIO5 5 UART1_CTS gpio?
ECSPI1_MOSI_ECSPI1_MOSI SPI1_MOSI SPI MOSI 19 20 GND GND GND
ECSPI1_MOSI_ECSPI1_MISO SPI1_MISO SPI MISO 21 22 GPIO GPIO6 6 GPIO1_7 gpio?
ECSPI1_MOSI_ECSPI1_MCLK SPI1_SCLK SPI CLK 23 24 SPI_CS0 SPI1_SS0 ECSPI1_SS0_GPIO5_IO9 spi0 ?
GND GND 25 26 SPI_CS1 GPIO1_6 GPIO1_IO06_GPIO1_IO6 spi0 ?
Not Used I2C Data 27 28 I2C clock NC NA NA
gpio8 GPIO1_IO08_GPIO1_IO8 GPIO1_8 GPIO 29 30 GND GND
gpio11 GPIO1_IO11_GPIO1_IO11 GPIO1_11 GPIO 31 32 GPIO UART3_TXD SNVS_TAMPER0__GPIO5_IO00 gpio?
gpio13 GPIO1_IO13_GPIO1_IO13 GPIO1_13 GPIO 33 34 GND GND
NA NA NC GPIO 35 36 GPIO UART3_RXD gpio?
NA NA NC GPIO 37 38 GPIO Not Used gpio?
GND GND 39 40 GPIO / 1-Wire NC NA NA

Tested RPi shields/hats

Tips

Bootstrap

U-Boot

  • Use OPOS6ULDev "User" LED in U-Boot scripts:
    • ON:
       BIOS> gpio set 68 
    • OFF:
       BIOS> gpio clear 68 

Linux

  • to activate login in Framebuffer console, please uncomment /etc/inittab line 35 this way:
# Set up a getty on LCD
tty1::respawn:/sbin/getty 38400 tty1

Links

  • RaspberryPi is a registered trademark of RaspberryPi Foundation.