MTF-T035
TFT Specifications
The MTF-T035 320x240 3.5" color TFT display from Microtips is the default TFT display supported. Two pin compatible versions are available. One with touchscreen (analog outputs) and one without. The MTF-T035 is provided with a 4 white led backlight.
The specification can be found here: [1]
Some photos are although available here: Board Pictures
Adapter Board
This kind of LCD requires an adapter board. The small board generates the required bias voltages, integrates a while led driver and provides a standard 2.54 connector interface. It has to be noted that a simple 3.3V supply must be used.
The schematics can be found here: [2]
The assembly drawings can be found here: [3]
Note that the pin 1 of the connectors are altough written in the top layer copper.
Connections with the DevLight
Just connect signals with same names together. Use only short wires !
The DevLight schematics and specification may be usefull: [4]
Once done verify the connections by means of your multimeter. Do not forget to check the 3.3V supply polarity on the LCD_adapt board before to power up the system !
LCD orders
Please add your name and the LCD type you want to the list below. On order will be placed in two/three weeks. The production of the LCD Adapter board has been launched. Expected delivery date: Week 17/18
- Rachid Koucha: 1x LCD_Touchscreen
- Henri Geist: 1x LCD_Touchscreen ?
- ThomasB: 1x LCD (with or without touchscreen)??
- Michael Lerjen: 1x LCD (with or without touchscreen)??
- Olivier Coutanceau: 1x LCD_Touchscreen
