Setup

On this page, you will find all the usefull informations you need to configure your Armadeus board for optimum usage.

First StartUp

Just got your Armadeus board and want to start playing with it ? Follow these quick steps to setup your environment accordingly:

Connect your APF to your development board (custom or DevLight/DevFull) ( your system will be hereafter refered to as "the Target") --->>
Connect your PC (= "the Host") to your board with a null-modem RS232 cable
Connect the power supply on your development board (+5Vdc on a Devlight, +7Vdc to 24Vdc on a DevFull. + is in the middle of the connector, - on the side)
Establish the communication between your Host and your APF
Verify your system is booting by starting Linux: In U-Boot console, type "boot". Several informations will be displayed on your terminal like on this screenshot
If Linux has successfully started, your hardware is operationnal. You can then proceed with the toolchain installation. See Basics below.

Toolchain: How to install the development environment for the Armadeus boards
Communicate: How to communicate with your board from the Host
Target Software Installation: How to install U-Boot, Linux and your Rootfs images on your board

Network Configuration: how to configure Host and Target network (NFS, TFTP)
Serial Transfer: how to transfer files between your Host and your Armadeus board with the RS232 link (if you don't have Ethernet)
MultiMediaCard: how to use MMC/SD cards on Linux with your Armadeus board

TO BE REMOVED FROM THIS PAGE:

FrameBuffer: how to configure and use the framebuffer for new LCDs
How to control the backlight of you graphical LCD (if it supports it)
GPIO Driver: how to configure the GPIO driver
Boa: How install and configure the boa Web server on your board
USB Gadget: how to configure your Armadeus board to use it as a USB device (aka Gadget in Linux language)
Digital to Analog Convertion: how to configure and use the DAC on your board
Analog to Digital Converter: how to install and use the on board ADC (max1027)
PWM: how to use the i.MX integrated PWM
RTC: how to use an external Real Time Clock (Maxim DS1374)
Watchdog: how to configure and use the i.MX integrated Watchdog
TV Output: How to use the SVideo output of the APF9328DevFull
USB Host: How to use the ISP176x USB Host controller of the APF9328DevFull
TSC2102 Linux driver details : How to configure and use the touchscreen controller
Adeos: How to install Adeos on your board

BootLoader: (U-Boot useful tips)
BootStrap: Install U-Boot from scratch or recover your U-Boot if it was corrupted