Communicate

How-To connect your Armadeus board to your development Host.

Forewords

The default connection uses a simple RS232 Null-Modem cable (with or without USB<->serial adapter).
If you want to transfer data in a faster way, the Ethernet link is recommended.
At this stage, you should have something looking like that (IP addresses may change):

Connection Setup

A Terminal emulator (for RS232 link) and a TFTP server (for Ethernet link) have to be configured, depending on your Host operating system:

• Linux: configuring RS-232 and TFTP on a Linux Host to communicate with your board
• Window$: configuring RS-232 and TFTP on a Window$ Host to communicate with your board