U-Boot communication quick check

From ArmadeusWiki
Revision as of 17:18, 2 March 2009 by JulienB (Talk | contribs) (New page: ==U-Boot communication quick check== * Verify that your RS232 cable is correctly connected * The bootstrap jumper must be removed * Start the RS232 terminal on t...)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

U-Boot communication quick check

  • Verify that your RS232 cable is correctly connected
  • The bootstrap jumper must be removed
  • Start the RS232 terminal on the Host side (115200 bauds 8N1)
  • Reset the board
  • U-Boot must start

Here is a screenshot of what you will see on your Terminal emulator during the Linux boot.

Retrieved from "http://armadeus.org/wiki/index.php?title=U-Boot_communication_quick_check&oldid=5971"