Beginner's tutorial step 1
From ArmadeusWiki
Revision as of 15:41, 15 May 2009 by JulienB (Talk | contribs) (New page: * Plug your APFxx module to your development board (custom or DevLight/DevFull) (your system will be hereafter referred to as "the Target") {| class...)
- Plug your APFxx module to your development board (custom or DevLight/DevFull) (your system will be hereafter referred to as "the Target")
 An APF9328 connected to a DevLight |
File:Apf9328 on devfull.png An APF9328 connected to a DevFull |
File:Apf27 on dev27.png An APF9328 connected to a Dev27 |
- Connect your PC (= "the Host") to your board with a null-modem RS232 cable (only Rx/Tx/Gnd signals are needed). If you don't have a RS232 port on your Host, you can use a "USB <-> serial" converter (you'll still require the null-modem cable).
File:Rs232cable connected.png
RS232 Null Modem cable connected on the development board
| Navigation: | |
|---|---|
|
<< Previous step You are in step N°1 Next step >> | |
