Chimei LW700

This adaptor board allows you to connect a CHIMEY LW700AT LCD to your DevFull.
The description, the datasheet and the schematics of this adaptor board can be found here.

The following table summarizes the possibilities to connect the LQW700AT and the Touchscreen to your development board:

	APF27Dev
TFT usage	flat cable (1) connected between J10 of the APF27Dev and X5 of the LCD_Adapt Connection between APF27Dev and LW700_Adapt
Touchscreen usage	All touchscreen signal are provided by main flat cable.

(1) Flat cable

A simple flat cable (PC like) can be used to connect the LW700_Adapt to the APF27Dev. If you do not have one, a ready to use cable can be found here.
Align the pins 1 (square via) on both boards together. Do not use long cables.

LW700_adapt links

• documentation

Links

• Linux framebuffer configuration
• Developing graphical applications with SDL