Xenomai:Blinking LEDs
From ArmadeusWiki
This tutorial explains how to create a simple Xenomai application. This application will blink the APF9328DevFull user LED (connected to pin 31 of i.MXL portD; on the APF27 you would use pin 14 of portF).
Application code
$ mkdir xeno_led $ vim xeno_led/blink.c
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <signal.h>
#include <sys/mman.h>
#include <native/task.h>
#include <native/timer.h>
#define TIMESLEEP 1000000000 /* 1 sec */
#define LED "/dev/gpio/PD31" /* APF9328 */
#define LED "/dev/gpio/PF14" /* APF27 */
RT_TASK blink_task;
int fd;
void blink(void *arg __attribute__((__unused__)))
{
int iomask = 0x00;
rt_task_set_periodic(NULL, TM_NOW, TIMESLEEP);
while(1) {
rt_task_wait_period(NULL);
write(fd,&iomask,sizeof(iomask));
iomask ^= 1;
}
}
void catch_signal() {}
int main(void)
{
signal(SIGTERM, catch_signal);
signal(SIGINT, catch_signal);
/* Avoids memory swapping for this program */
mlockall(MCL_CURRENT|MCL_FUTURE);
/* led device opening */
if ((fd = open(LED, O_WRONLY)) < 0) {
printf("Open error on %s\n",LED);
exit(0);
}
/* Task Creation */
rt_task_create(&blink_task, "blinkLed", 0, 99, 0);
rt_task_start(&blink_task, &blink, NULL);
getchar();
rt_task_delete(&blink_task);
close(fd);
return 0;
}
This source looks very like a classical Linux application with threads and nanosleep() function.
The only differences are on the task creation using Xenomai API:
- Create a new task with stksize stack size, prio level of priority and mode type of creation:
int rt_task_create(RT_TASK * task, const char * name, int stksize, int prio, int mode)
- Launch the new task with entry function and cookie parameters:
int rt_task_start (RT_TASK *task, void(*entry)(void *cookie), void *cookie)
- set for the task periodic, idate time for the first release (time in nanoseconds)
int rt_task_set_periodic (RT_TASK *task, RTIME idate, RTIME period)
- To block the task during the previously set period:
int rt_task_wait_period (unsigned long *overruns_r)
Makefile
The second step is to create a Makefile with specific Xenomai includes.
$ vim xeno_led/Makefile
###### CONFIGURATION ######
DEST_DIR=/tftpboot/local/bin
ARMADEUS_BASE_DIR=../
include $(ARMADEUS_BASE_DIR)/Makefile.in
XENO=$(ARMADEUS_ROOTFS_DIR)/usr/xenomai
CC:=$(ARMADEUS_TOOLCHAIN_PATH)/arm-linux-gcc
LD:=$(ARMADEUS_TOOLCHAIN_PATH)/arm-linux-ld
CXX:=$(ARMADEUS_TOOLCHAIN_PATH)/arm-linux-g++
AS:=$(ARMADEUS_TOOLCHAIN_PATH)/arm-linux-as
NM:=$(ARMADEUS_TOOLCHAIN_PATH)/arm-linux-nm
AR:=$(ARMADEUS_TOOLCHAIN_PATH)/arm-linux-ar
SIZE:=$(ARMADEUS_TOOLCHAIN_PATH)/arm-linux-size
OBJCOPY:=$(ARMADEUS_TOOLCHAIN_PATH)/arm-linux-objcopy
EXEC=blink_led_xeno_userspace
SRC= $(wildcard *.c)
OBJ= $(SRC:.c=.o)
CFLAGS=-g -W -Wall -I$(XENO)/include -I$(XENO)/include/native -I$(XENO)/include/rtdm -D_GNU_SOURCE -D_REENTRANT
LDFLAGS=-L$(XENO)/lib -Xlinker -rpath $(XENO)/lib -Xlinker $(XENO)/lib/libnative.a $(XENO)/lib/librtdm.a -lpthread -lnative -lrtdm
$(EXEC): $(OBJ)
$(CC) -o $@ $^ $(LDFLAGS)
$(OBJ): $(SRC)
$(CC) $(CFLAGS) -o $@ -c $<
all: $(EXEC)
clean:
rm -rf $(OBJ)
rm -rf $(EXEC)
rm -f *.c~ *.h~ Makefile~
install: $(EXEC)
@mkdir -p $(DEST_DIR)/$(EXEC)
echo "$(EXEC):native:!./$(EXEC);popall:control_c" > $(DEST_DIR)/$(EXEC)/.runinfo
cp -f $(EXEC) $(DEST_DIR)/$(EXEC)
mrproper: clean
rm -rf $(DEST_DIR)/$(EXEC)
.PHONY: all install clean mrproper
- ARMADEUS_BASE_DIR: needs to be adapted to the correct path where the Armadeus SDK is installed, relatively to your example dir or as an absolute path.
- DEST_DIR: directory where the executables will be installed when doing make install. Here it assumes you used an NFS exported dir /tftpboot/local, mount as /usr/local on the board.
Compilation, installation and run
$ make -C xeno_led
- If you setup the NFS as indicated above, you can install the application on your board with:
$ make install -C xeno_led
- Otherwise you can install the executable to your board (through TFTP for example):
$ make install -C xeno_led/ DEST_DIR=/tftpboot
# mkdir -p /usr/local/bin/blink_led_xeno_userspace # tftp -g -r blink_led_xeno_userspace/blink_led_xeno_userspace -l /usr/local/bin/blink_led_xeno_userspace/blink_led_xeno_userspace 192.168.1.2 # tftp -g -r blink_led_xeno_userspace/.runinfo -l /usr/local/bin/blink_led_xeno_userspace/.runinfo 192.168.1.2 # chmod a+x /usr/local/bin/blink_led_xeno_userspace/blink_led_xeno_userspace
Running
- GPIO driver should be loaded:
# loadgpio.sh
- And you should be able to blink the LED from command line following these instructions
- Then, you must change directory to /usr/local/bin and type :
# xeno-load blink_led_xeno_userspace
