Communicate

How-To connect your Armadeus board to your development Host.

Forewords

The default connection uses a simple RS232 link (crossover cable).
Note: if your Armadeus board is equipped with an ethernet controller, this link can be used to speed up the linux and rootfs downloads.

Connection Setup

The RS232 tool (serial link) and TFTP tool (ethernet link) have to be configured according to your Host operating system:

Linux

Connection with U-Boot on Linux

Window$

Windows uBoot Connection

uBoot communication

• RS232 cable connected
• Bootstrap jumper removed
• Start the RS232 tool
• Reset the board
• uboot must start

screenshot